LUPO (ITA) Posted July 2, 2023 Share Posted July 2, 2023 Hello! When you do an accident with your truck in the game, you use F7 or resume the game from autosave? I usually resume the game from the last save. Thanks for your answer. Kind Regards, ROMANISTA [ITA] TruckersMP Veteran Player Link to comment Share on other sites More sharing options...
L-DR@GO Posted July 2, 2023 Share Posted July 2, 2023 only when Required.. 1 Link to comment Share on other sites More sharing options...
Golden Monkey Posted July 2, 2023 Share Posted July 2, 2023 I usually use F7+enter to enter the repair shop, if I use autosave to restore the game, there will be a collision when there are players around. Once I was using autosave to recover a game, I accidentally bumped into a player around me and was banned for 7 days, I recommend using f7+enter. Link to comment Share on other sites More sharing options...
LUPO (ITA) Posted July 2, 2023 Author Share Posted July 2, 2023 1 minute ago, Golden Monkey said: if I use autosave to restore the game, there will be a collision when there are players around. With autosave... Isn't there the "ghost mode" like when you come into play? Link to comment Share on other sites More sharing options...
Golden Monkey Posted July 2, 2023 Share Posted July 2, 2023 5 minutes ago, ROMANISTA [ITA] said: With autosave... Isn't there the "ghost mode" like when you come into play? Using autosave to resume the game, you will be in the same place as other players and will go into ghost mode Link to comment Share on other sites More sharing options...
LUPO (ITA) Posted July 2, 2023 Author Share Posted July 2, 2023 Just now, Golden Monkey said: Using autosave to resume the game, you will be in the same place as other players and will go into ghost mode So how do you create a collision by being in "ghost mode"? If you return to the game and stay in traffic with "ghost mode" another player's truck should flash until it moves and returns to normal (Where there is not traffic). It's been a while since I used autosave and so I don't remember, however, I've never had collision problems for autosave. Link to comment Share on other sites More sharing options...
Golden Monkey Posted July 2, 2023 Share Posted July 2, 2023 7 minutes ago, ROMANISTA [ITA] said: So how do you create a collision by being in "ghost mode"? If you return to the game and stay in traffic with "ghost mode" another player's truck should flash until it moves and returns to normal (Where there is not traffic). It's been a while since I used autosave and so I don't remember, however, I've never had collision problems for autosave. If you use auto save to restore the game, sometimes you may be between two players. Link to comment Share on other sites More sharing options...
Andy1411 Posted July 2, 2023 Share Posted July 2, 2023 38 minutes ago, ROMANISTA [ITA] said: So how do you create a collision by being in "ghost mode"? If you return to the game and stay in traffic with "ghost mode" another player's truck should flash until it moves and returns to normal (Where there is not traffic). It's been a while since I used autosave and so I don't remember, however, I've never had collision problems for autosave. If everything is as intended, your description is correct. But there may be the issue, that you cause damage to other players, if the ghost mode expires, while you are in other players trucks/ trailer and drive forward. While leaving their textures it may happen you push them backwards pretty hard and cause some serious damage. Or it may happen, that you reload on an empty spot, your ghost mode expires and the timing for the driver behind you is that unlucky he reaches you in that exact moment. He believed, that he could pass through you while in ghostmode but he punshes right into you. This happened to me two times. Pretty unlucky. 1 Link to comment Share on other sites More sharing options...
3749771 Posted July 2, 2023 Share Posted July 2, 2023 Hello there! First of all, thank you for creating an interesting topic. I use both the F7 and the save-load method when a car accident occurs in the game. However, I choose a different method depending on the situation on the road. If there is a lot of traffic jam, F7 if there is a lot of traffic jam because the ghost mode is canceled after calling auto save, so damage may occur due to contact with vehicles. is mainly used. Kind Regards, Werzey* 2 Languages: EN / KRN / JAP | Discord: werzey TruckersMP Support System | Knowledge Base | TruckersMP Rules | Feedback System Report System | Appeal Ban Link to comment Share on other sites More sharing options...
TimeTimes Posted July 2, 2023 Share Posted July 2, 2023 1 hour ago, ROMANISTA [ITA] said: Hello! When you do an accident with your truck in the game, you use F7 or resume the game from autosave? I usually resume the game from the last save. Thanks for your answer. Kind Regards, ROMANISTA [ITA] TruckersMP Veteran Player It depends on where the accident happens. If it was in a busy area, like cd road, I always use F7. I prefer to spawn at the service station rather than on the road in between other players. If I crash in a quiet area, I'll load an autosave as it does save time and there won't be any load damage. <--> | English / Dutch | <--> < Need help with anything? > < Someone broke the rules? > < Got banned unfairly? > Link to comment Share on other sites More sharing options...
LUPO (ITA) Posted July 2, 2023 Author Share Posted July 2, 2023 38 minutes ago, Andy1411 said: If everything is as intended, your description is correct. But there may be the issue, that you cause damage to other players, if the ghost mode expires, while you are in other players trucks/ trailer and drive forward. While leaving their textures it may happen you push them backwards pretty hard and cause some serious damage. I know and what you said is correct. But if it happens that I'm in the middle of traffic in ghost mode and there is another player in the same place where I am, I don't move until the player passes by and keeps flashing his truck/trailer. The player behind stops if my ghost mode is over, otherwise he would collide with my truck. I've always hated collisions and I've always used caution. Link to comment Share on other sites More sharing options...
RedNub Posted July 2, 2023 Share Posted July 2, 2023 Yoo @ROMANISTA [ITA] big faan Thank you for creating the topic and making this community more active. There is really depends, when the accident happen, cause for example on Calais-Duisburg road I usually trying to load latest save I have if there is some, however it might be not good for someone who has low PC budget - that means the loading of the save could be longer than usuall and then you block the road for upcomming trucks. Secondly, the next thing what I really don't like is when someone spawn in the Middle of the road, I always goes roode xd Lastly, in some cases is better to use f7 enter. Regards, RedWolf [CZ] TruckersMP Veteran Driver IV I MCG Driver RedNub I TruckersMP (ETS2 - 6,250 hours) Reporting a player | Appeal your ban | Support System | Recruitment Link to comment Share on other sites More sharing options...
Almira xeltz. Posted July 2, 2023 Share Posted July 2, 2023 Hi mate , @ROMANİSTAN [İTA] It is always the best idea to throw f7 enter to avoid blocking if there is any collision. If someone has blocked me I always move on if I can get back on the road. If I have taken heavy damage, I use the /fix command and continue on my way again. If I cannot do any of these, I send myself to the safe area by pressing f7 immediately without waiting. Reminder: Always remember to take the game recording Link to comment Share on other sites More sharing options...
LUPO (ITA) Posted July 2, 2023 Author Share Posted July 2, 2023 Hey hey. Thanks for your answer @[MCG] RedWolf [CZ] ~, @Almira xeltz.. Maybe I've always been lucky not to have collisions when I used autosave without collisions on others . But... Yes... Sometimes I used F7 + Enter. Link to comment Share on other sites More sharing options...
Deadwilk Posted July 3, 2023 Share Posted July 3, 2023 i use /fix and continue driving 1 Link to comment Share on other sites More sharing options...
LUPO (ITA) Posted July 3, 2023 Author Share Posted July 3, 2023 12 hours ago, Deadwilk said: i use /fix and continue driving Thanks for your reply though I meant to say as an accident of a truck overturning on the game. 1 Link to comment Share on other sites More sharing options...
Revival-003[TessaYiOvO] Posted July 4, 2023 Share Posted July 4, 2023 On 7/2/2023 at 11:51 AM, Golden Monkey said: If you use auto save to restore the game, sometimes you may be between two players. then i'll get the pause menu (F1 with keyboard or whatever button you mapped on your controller/wheel) and they can get through you without sending you into the sky 1 Link to comment Share on other sites More sharing options...
NateDoggNZ Posted July 4, 2023 Share Posted July 4, 2023 F7 as soon as possible. Especially on C-D as everything backs up so quickly and causes more crashes and chaos. Thankfully doesn't happen often as I hug the shoulder though Link to comment Share on other sites More sharing options...
Fastmax Posted July 5, 2023 Share Posted July 5, 2023 When i crash, i load an autosave. Link to comment Share on other sites More sharing options...
Davina Posted July 7, 2023 Share Posted July 7, 2023 Autosave. Link to comment Share on other sites More sharing options...
Interstate Nomad Posted July 7, 2023 Share Posted July 7, 2023 I don't cause accidents. As I use World of Trucks jobs, using Autosave doesn't restore any trailer damage and is therefore useless. 1 Link to comment Share on other sites More sharing options...
MOCKlNGBlRD Posted July 8, 2023 Share Posted July 8, 2023 I always use my autosave. Link to comment Share on other sites More sharing options...
'Rossoo770s. Posted July 9, 2023 Share Posted July 9, 2023 Hello @ROMANISTA [ITA], Thanks for creating this topic and making TruckersMP in a Better place. I rarely load a quicksave when I drive,I always make F7 or /disconnect and I go to the service if I'm near C-D area. I never caused traffic jams for my mistakes or engine problems, I do F7 or in the worst case If I'm too tired and pissed off I quit by ALT+F4 But driving following traffic and road rules is quite impossible to make a crash...who makes crash is always who don't follow the road rules and drive like an idiot. Kind Regards, Rosso. | Aurora Driver. REMEMBER that you are playing a SIMULATOR GAME and this game is NOT a RACING GAME. If you like races,maybe you're on the wrong game. SL: 80-90 Km/h Link to comment Share on other sites More sharing options...
LUPO (ITA) Posted July 9, 2023 Author Share Posted July 9, 2023 21 minutes ago, Rosso. said: Hello @ROMANISTA [ITA], Thanks for creating this topic and making TruckersMP in a Better place. I rarely load a quicksave when I drive,I always make F7 or /disconnect and I go to the service if I'm near C-D area. I never caused traffic jams for my mistakes or engine problems, I do F7 or in the worst case If I'm too tired and pissed off I quit by ALT+F4 But driving following traffic and road rules is quite impossible to make a crash...who makes crash is always who don't follow the road rules and drive like an idiot. Kind Regards, Rosso. | Aurora Driver. Hello @Rosso., Thank you for your answer. What exactly is the "ALT + F4" command for? Just out of curiosity. Thanks. Kind Regards, ROMANISTA [ITA] TruckersMP Veteran Player Link to comment Share on other sites More sharing options...
'Rossoo770s. Posted July 9, 2023 Share Posted July 9, 2023 8 minutes ago, ROMANISTA [ITA] said: Hello @Rosso., Thank you for your answer. What exactly is the "ALT + F4" command for? Just out of curiosity. Thanks. Kind Regards, ROMANISTA [ITA] TruckersMP Veteran Player Close the game and turn off your pc,try it REMEMBER that you are playing a SIMULATOR GAME and this game is NOT a RACING GAME. If you like races,maybe you're on the wrong game. SL: 80-90 Km/h Link to comment Share on other sites More sharing options...
Recommended Posts