Jump to content
  • 0

Have any Lag Fix for Low end pc ?



11 answers to this question

Recommended Posts

  • 0

Hello :) 

Try these

1. Locate and Secure your Profiles, Copy them to a seperate Folder.

ATS: http://prntscr.com/f7ofiu

ETS: http://prntscr.com/f6bney

2. Then de-install ATS/ETS2 via Steam and de- install TruckersMP.

3. Restart your PC.

4. Then start searching for all old Folders of TruckersMP and ATS/ETS2 and Delete them. A RegCleaner Software will be helpfull. Sometimes there are "Dumb" Folders/Paths to ATS/ETS2, that were created by the TruckersMP Launcher. 




5. When u deleted all Folders, Restart ur PC Again.

6. Log In to Steam-->Rightclick on Steam--->Settings-->Download-->Steam Library Folders-->Add Library Folder---->Choose another Partition or Hdd and mark it as Default Library. 



7. After that Procedure, Re- Install ATS/ETS2 via Steam into the new Library, make sure you installing this Version.

ETS: http://prntscr.com/f7nmne

ATS: http://prntscr.com/f85fz

important: Check TruckersMP for the actual Versions of the Game, they can be different!!

8. Start the Game in Single Player and check the Version. Create a new Profile, but do not Drive. Close the Game.

9. Search with Windows File Explorer the Path to the ETS/ATS Installation. Keep this Path in Mind.

After that, download the actual Version of TruckersMP, unpack it to a seperate Folder. Install it from this Folder as Administrator.

Make sure that you having the right Path to the Games when you Installing TruckersMP.

You have to check them manually, do not let the Launcher Auto searching for them.

10. After the Installation start the Launcher as Administrator and let him finishing his Downloads. Then start the Multiplayer. If you can Play, close the Game and insert your old Game Pofiles.


Also looks at these topics


  • HaulieLove 1
Link to comment
Share on other sites

  • 0

ETS2 and ATS aren't games that were built with multiplayer in mind. I have an i7 and a 1080. I still get very low FPS, especially in cab, in populated areas. There is not much you can do honestly. You are just simply limited by hardware.

  • Like 1


Intel i7 7700k│ASUS ROG Maximus IX Hero│G.SKILL TridentZ RGB 16GB 3000MHz │EVGA GTX 1080 FTW│EVGA SuperNOVA 850W P2│Samsung 970 EVO 1TB NVMe M.2/Samsung 850 EVO 500GB│Corsair H100i v2│Corsair iCUE 465x RGB

Audio Technica AD700's│Beyerdymanic DT770's 80Ω│Corsair Strafe RGB Blues│Logitech G502 Spectrum│Alienware AW3420DW



Link to comment
Share on other sites

  • 0
Guest -Andreas- [Chef][GER,ENG]


Disabling Season Effects and Winter Mod may help gain some FPS.

Disabling Cabin Accesories and Flags may also help for low end PCs.Using the 2 outside flags on your vehicle can drop you 30 frames and if you use the small flags in the cabin can drop you up to 50 frames!!!

Owning DLC's might help a bit with low FPS aswell in crowded areas since the game instantly loads the original skin and doesn't replace it with a random color.

Installing the game into a SSD helps with game loading and auto-save freeze.

Always install the latest GPU drivers. Before you install the new drivers remove the old ones with Display Driver Unistaller (DDU). If you are on a desktop download the drivers from AMD or Nvidia. If you are using a laptop you should download the drivers from the manufacturer!

Keep trucks and drivers to the minimum, the more drivers and trucks you have the more lag will cause you when the game auto-saves or when you teleport. It also helps saving quicker when you use PrtScn (quick save).

A max amount of 15 drivers in 3 garages is recommended. Other garages can be bought but do not assign any AI drivers to them.

Changing your save format for the purposes of save editing will cause auto-save lag issues on large profiles and slower systems. To remedy this, changing the `g_save_format` value to the default of 0 will drastically reduce your profile's auto-save time. Though with the default save format, you cannot make modifications to your save file, such as adding customs jobs using Virtual Speditor.

Always but always make sure you run the game on DirectX and not OpenCL. Running the game on OpenCL will cut your FPS to half or even cause you game crash. If you are not sure if you run MP in DirectX run the game once in SP by Choosing "Launch ETS2 DirectX (64-bit)". 


Kind regards


Link to comment
Share on other sites

  • 0

the game is more a cpu game but like iv got a overclocked amd fx 6300 and a gtx770 the 4gbs is enough for high settings and 7+ fps in that city but iv found scs games are more cpu but thats changed with 1.32 


you could use nvidias optimizer in the gforce experience or go into the pc settings and im sure you can chose what is high priority over other stuff using your pc power

Link to comment
Share on other sites

  • 0



Follow these guides:

Solution 1:

The other way is to try and Clear your computer cache which can be done from CCleaner or Clean Master for PC 

I personally reccomend Clean Master because using it from last 2 years and works perfectly :but ofcourse either of them does the job of clearing cache from your computer and other programs

Solution 2:

If that didn't work too you can try Cleaning up your C: Disk by the following steps


Step 1:


Step 2:


Step 3: After clicking Disk Cleanup wait for the system to collect junk and tell you via another popup box

Step 4: Tick Mark everything once it shows that this much junk lies , Their will be several like Offline website data,Temprorary files so yeah you can Tick all and Click OK button and let the cleaning happen after that Restart your PC and wait for it to reach idling speed.


Solution 3:

Log in on the MP

Press your Tab button -> go to Settings

General -> Development Logging -> Disable

Drivers animation -> Disable

After you did that just click on Apply and ok -> Restart your Game


Solution 4:

Try to launch the game as admin and with DirectX (64)

Start ETS 2 normally via Steam (http://prntscr.com/hy5sy4)

After that click on "Launch with DirectX (64)" (http://prntscr.com/hy5tev)

Wait until you are InGame.

Close ETS 2 and start TMP as admin! (http://prntscr.com/hy5u90 http://prntscr.com/hy5uig)

Also make sure your graphic driver is up to date!


also maybe this video can help you a little


hope this helpful


Best Regards

Soul Knight:)

Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.