If you have done save editing on trailers then you have probably seen and changed the trailer definition. Whether that is adding states or changing the weight limit on a trailer.But what has troubled me is how would i go about making a double b double not be glitching when sitting still? I have mass rations on it copied from other trailer so it has the mass_ratio from a 28ft trailer for the 26ft B trailer and a 45ft from a 45ft and dolly etc. However i can not understand what to set the length which is below the mass ratios to. here are lengths from various trailers
53ft reefer length: &41813c36
double 45 length: &41e535a8
28ft length: &41088ce7
45ft length: &415b74bc
triple 28ft length: &41e535a8 note that if you see mass ratios from a rm double its different.
I went to scs wiki to try to find some answers https://modding.scssoft.com/wiki/Documentation/Engine/Units/trailer_def
In the section for trailer length it states "The length of the trailer combination in meters." I tried to make sense of a 28ft trailer do i convert 28ft to mm or cm? Sadly no because neither number matched to anything in its length provided from the game.sii so how would i figure a 28ftB+45ft A+2a dolly+28ft B+45ft A? I can handle it well and deliver with it, except i was informed it was in the ground when i was on the side of the road. So id like to fix that issue because someone that i have seen ran a trailer set of 4 28ft B trailers and a 53ft being the 5th trailer can sit in phoenix and not have it glitching then i gotta learn what did i get wrong?
This is the trailer definition of the trailer that i had at the time.
I do not have an image of the 5 trailer combo but if a triple 45ft works fine whens still then a quad is close but slightly longer works.
image of others that have 3x45ft picture was not taken by me.
and heres the 3x45ft trailer definition that i have used and seen that it does not shake or tilt i checked it when with donnytheory at a service station. When i seen that worked fine i did the same to the double b double
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.
Question
Fuso9130 / Derpy
If you have done save editing on trailers then you have probably seen and changed the trailer definition. Whether that is adding states or changing the weight limit on a trailer.But what has troubled me is how would i go about making a double b double not be glitching when sitting still? I have mass rations on it copied from other trailer so it has the mass_ratio from a 28ft trailer for the 26ft B trailer and a 45ft from a 45ft and dolly etc. However i can not understand what to set the length which is below the mass ratios to. here are lengths from various trailers
53ft reefer length: &41813c36
double 45 length: &41e535a8
28ft length: &41088ce7
45ft length: &415b74bc
triple 28ft length: &41e535a8 note that if you see mass ratios from a rm double its different.
I went to scs wiki to try to find some answers https://modding.scssoft.com/wiki/Documentation/Engine/Units/trailer_def
In the section for trailer length it states "The length of the trailer combination in meters." I tried to make sense of a 28ft trailer do i convert 28ft to mm or cm? Sadly no because neither number matched to anything in its length provided from the game.sii so how would i figure a 28ftB+45ft A+2a dolly+28ft B+45ft A? I can handle it well and deliver with it, except i was informed it was in the ground when i was on the side of the road. So id like to fix that issue because someone that i have seen ran a trailer set of 4 28ft B trailers and a 53ft being the 5th trailer can sit in phoenix and not have it glitching then i gotta learn what did i get wrong?
This is the trailer definition of the trailer that i had at the time.
trailer: ""
gross_trailer_weight_limit: 515000
chassis_mass: &464b6933
body_mass: 0
axles: 12
volume: &42bf3333
body_type: refrigerated
chain_type: tpdouble
country_validity: 7
country_validity[0]: arizona
country_validity[1]: nevada
country_validity[2]: new_mexico
country_validity[3]: oregon
country_validity[4]: utah
country_validity[5]: washington
country_validity[6]: california
mass_ratio: 5
mass_ratio[0]: &3e99999a
mass_ratio[1]: &3f19999a
mass_ratio[2]: &3dcccccd
mass_ratio[3]: &3e99999a
mass_ratio[4]: &3f19999a
length: &41e535a8
source_name: "trailer_def.scs.box.tpdouble_1.reefer"
}
I do not have an image of the 5 trailer combo but if a triple 45ft works fine whens still then a quad is close but slightly longer works.
image of others that have 3x45ft picture was not taken by me.
and heres the 3x45ft trailer definition that i have used and seen that it does not shake or tilt i checked it when with donnytheory at a service station. When i seen that worked fine i did the same to the double b double
3x45ft info trailer: ""
gross_trailer_weight_limit: 51500
chassis_mass: &46053e52
body_mass: 0
axles: 5
volume: &431dcccd
body_type: refrigerated
chain_type: tpdouble
country_validity: 7
country_validity[0]: arizona
country_validity[1]: nevada
country_validity[2]: new_mexico
country_validity[3]: oregon
country_validity[4]: utah
country_validity[5]: washington
country_validity[6]: california
mass_ratio: 5
mass_ratio[0]: &3ee66666
mass_ratio[1]: &3dcccccd
mass_ratio[2]: &3ee66666
mass_ratio[3]: &3dcccccd
mass_ratio[4]: &3ee66666
length: &41e535a8
source_name: "trailer_def.scs.box.tpdouble.reefer"
}
[BRONY] Fuso / Derpy
2 answers to this question
Recommended Posts