I can't use the CB Radio in the game, my sound is not going

[Deli|Yürek]

First of all, I hope you can help me.

My problem is I can't use the in-game radio, my radio is on and it's on channel 19 and there are people around me but they don't hear my voice. The speaker icon in the lower right corner is on but my sound is not going to them. I looked at the tab settings, selected the microphone and tested it. my voice is coming back to me and my microphone is working what is the problem? 

[Guest]

Hello @Deli|Yürek, 

Do you see a speaker icon in the right corner when you hold down the x button? First of all, if you see this icon, try the following solutions, if this icon is not visible, verify the game files.

Solution 1

Start TruckersMP, then press the settings button in the player list, or press the settings icon in upper left corner on the login screen, select the "Sound" tab, then check the "Speaker device" - change it to "Default", then press "Apply". After that, press the "Start test" on the same tab. You should hear yourself as you speak during the test.

 

Also try this solution:

1. Right click the volume icon on your taskbar:  http://prntscr.com/lr5rjc

2. Click sounds and then go to the playback tab http://prntscr.com/lr5qoj

3. Right click speakers / the green ticked device and select properties: http://prntscr.com/lr5qfq

4. Go to the advanced tab. Then ensure the following settings in the image are set. Afterwards, press restore defaults. http://prntscr.com/lr5q12

5. Restart TruckersMP.

6. If this fails to work: a reinstall of your audio drivers would also eliminate another possible solution.

 

Solution 2

1. Check your default microphone - it shouldn't be set to stereo mix or similar

2. Check if your headset has the mic mute switch somewhere. If you find it, set it into opposite state - you might've muted the mic by accident.

3. Check the volume of the default microphone - if it's very low(close to 0%), raise it up.

4. Check if you have plugged in the microphone into microphone connector(may not be applicable for USB headsets).

 

Also make sure that CB radio is actually turned on in-game.

If everything listed is checked and fixed(if applicable) there's settings in-game to change the volume of CB transmit and receive. 

In the settings(cog icon) select "sound" tab and you'll find voice and mic volume sliders. First one sets the CB receive volume, the second one sets the CB transmit volume.

 

Open your panel with the TAB key multiplayer > Voice > Voice volume setting pull to the right.

Open the game. Return to the desktop.at the time sound level in the audio mixer from the speaker icon, right click on TruckersMP.

Solution 3

If you are using a sound card, please update your sound card. If you're not using a sound card, update your motherboard's Realtek HD Audio driver.

 

https://www.realtek.com/en/downloads

*Restart the computer after installation.

 

My Documents > ETS2MP > config.txt Replace the settings with these values. (If this step does not work, delete the config.txt file)

 

   "sounds" : {
      "engine_sound_type" : 0,
      "horn" : true,
      "lift_axle" : true,
      "mic_device" : "Default",
      "mic_volume" : 90,
      "reversing" : true,
      "speaker_device" : "Default",
      "voice_volume" : 100
   }
}

[Nightmaree.]

Hello there @Deli|Yürek,

 

Has your question been answered with the above given answer(s)?

Your confirmation of the status of your issue helps us keep the forum organised!

 

I look forward to your response.

 

King regards,

Nightmaree.

TruckersMP Support

[Deli|Yürek]

I solved it somehow, thanks for your help, thread can be locked

[Zysto]

Hello there @Deli|Yürek,
  

We are glad to hear that your Problem got solved. 
I will now mark this topic as solved and lock it. Feel free to contact us again if you should require help again!

 

Have a nice day!

 

Kind Regards,
@Zysto
TruckersMP - Support 
  

//Locked and Moved to Solved.