imMetallic Posted May 12, 2020 Share Posted May 12, 2020 G’day you legends. I just a bit curious on why people flash high beams as I go past them. I’ve been on TruckersMP since 2016 but only really began to pick up that tones of people flash their high beams as they go past, normally on the C/D road. Is there a reason for this? Down here in Australia, it’s used as a friendly warning to slow down due to police/speed cameras and related stuff. But, let’s face it, truckersMP don’t have police stops/cameras, you know. So I was wondering, what does it mean when people flash their beams at me? Are they saying hello or trying to tell me something? - Metallic Link to comment Share on other sites More sharing options...
Nameless Ghoul Posted May 12, 2020 Share Posted May 12, 2020 Hello @imMetallic, Thank you for your post on our forums. It's a way for people to say hello. They are greeting you while on the road. Regards, Nameless Ghoul. Player Reports: https://truckersmp.com/reports Ban Appeal: https://truckersmp.com/appeals Game Rules: https://truckersmp.com/rules Link to comment Share on other sites More sharing options...
Guest Posted May 12, 2020 Share Posted May 12, 2020 Good day @imMetallic, Some people light up their high beam to restrict people's view. Like troll. Some people greet you by making a selector. This simply means hello. Instead, the horn can also be played, but it is better to make a selector in the evening, so the light is turned on. KİNG REGARDS TR|06ANKA58 Link to comment Share on other sites More sharing options...
JeffSFC Posted May 12, 2020 Share Posted May 12, 2020 Many players find it as an alternative to honking at passing drivers. I would try not to equate what you see on TMP with what occurs on actual roads. People here think trucks commonly drive 110 km/h everywhere after all. Intel i7 7700k│ASUS ROG Maximus IX Hero│G.SKILL TridentZ RGB 16GB 3000MHz │EVGA GTX 1080 FTW│EVGA SuperNOVA 850W P2│Samsung 970 EVO 1TB NVMe M.2/Samsung 850 EVO 500GB│Corsair H100i v2│Corsair iCUE 465x RGB Audio Technica AD700's│Beyerdymanic DT770's 80Ω│Corsair Strafe RGB Blues│Logitech G502 Spectrum│Alienware AW3420DW Link to comment Share on other sites More sharing options...
Geology Rocks Posted May 12, 2020 Share Posted May 12, 2020 people also so it if they haven't got a loud horn so they will flash there light instead to make sure you see them Link to comment Share on other sites More sharing options...
Stubborn. Posted May 13, 2020 Share Posted May 13, 2020 Many people do it for many different reasons. Some people just prefer to drive with their high beam lights on constantly, for whatever reason. Most people, including myself, will tend to flash back at those who use it to say hello, or to make sure somebody has seen me when the horn is inappropriate to be used (e.g. in a town with lots of other people, and the horn would not be heard). Link to comment Share on other sites More sharing options...
OldShrek Posted May 14, 2020 Share Posted May 14, 2020 Yeah, I often drive with the high beams on, in very dark places, for the much increased visibility. I typically use my air horn and go toot toot as people go by to say hello. Sometimes at night I'll cycle through the lights real quick (off, parking, on) like I've seen american truckers do all my life. (They apparently have a switch that turns off all the yellow accent lights and back on, including the trailer, often using this as a signal to the truck that just passed them that they're clear to move back over). It's not 100% possible to flick just the parking lights on and off while running headlights.. and if that's possible, please someone tell me because that would really do it for me. But I dislike flashing hi-beams because of other 'meanings' it has here. e.g.: "slow down, there's an accident up ahead/law enforcement/danger of any kind" Link to comment Share on other sites More sharing options...
Reggie. Posted May 15, 2020 Share Posted May 15, 2020 From time to time I flash my high beams to say hello to people. Although you wouldnt do this IRL because it does actually prohibit people from seeing the road. I only started doing it because I had seen others do it lol Reggie | Link to comment Share on other sites More sharing options...
imMetallic Posted May 15, 2020 Author Share Posted May 15, 2020 I thought honking was the way to say hello but I guess imagine 100 people doing that on CD road. Thanks for answering my question fellas Link to comment Share on other sites More sharing options...
MadCowTransport Posted May 15, 2020 Share Posted May 15, 2020 This leads me to a question.... is it considered rude in the game for us to drive with our high beams ALWAYS on at night? I do this because from what I can tell, oncoming high beams do very little to obstruct my vision (full ultra settings)... so there really is no reason not to use the high beam at all times, since it gives so much more visibility. I'm not actually blinding anyone am I? You have never truly trucked unless you have trucked with a MAD COW! Link to comment Share on other sites More sharing options...
Rudewolf Posted May 15, 2020 Share Posted May 15, 2020 Hello @MadCowTransport, ^ I don't think you can blind someone in the game. But me personally, I don't like it. I'm a driver in real life and you should turn the high beams off every time you are passing someone. I just don't know why, but I don't like it in the game too. But that's only my opinion, it's up to you how you want to use your lights. Have a great day. |Viva Trucking|Apply to Viva Trucking|Star Wars Fan|HAZMAT Division Link to comment Share on other sites More sharing options...
Red'Sire Posted May 17, 2020 Share Posted May 17, 2020 Hello @imMetallic, From time to time I flash my high beams to say hello to people. Tekerimiz 'DÜZ' Bassın.. |—————————————————————————————————| Red'Sire- Veteran Driver Link to comment Share on other sites More sharing options...
MadCowTransport Posted May 17, 2020 Share Posted May 17, 2020 On 5/15/2020 at 12:20 PM, Rudewolf said: Hello @MadCowTransport, ^ I don't think you can blind someone in the game. But me personally, I don't like it. I'm a driver in real life and you should turn the high beams off every time you are passing someone. I just don't know why, but I don't like it in the game too. But that's only my opinion, it's up to you how you want to use your lights. Have a great day. Totally understandable. I'll probably try to change my habits for the sake of realism. You have never truly trucked unless you have trucked with a MAD COW! Link to comment Share on other sites More sharing options...
Random_Truck_Driver Posted May 17, 2020 Share Posted May 17, 2020 Hi @imMetallic, Long time driver of the C-D road here. People flash their high beams on C-D road to to notify you for an accident down the road or an admin observing the area. It's another small detail that makes the C-D road more realistic and fun than the other areas of the map. In non-rush hour times where traffic is low even on the C-D road, people might flash their high beams to say hello. Link to comment Share on other sites More sharing options...
CKillerD Posted May 25, 2020 Share Posted May 25, 2020 On 5/12/2020 at 5:27 PM, imMetallic said: Down here in Australia, it’s used as a friendly warning to slow down due to police/speed cameras and related stuff. In Romania we do the same thing :)) Usually they say "Hi" with this gesture Link to comment Share on other sites More sharing options...
fidget3306 Posted May 28, 2020 Share Posted May 28, 2020 In the UK there are multiple meanings of this. A single long flash from a vehicle coming the other way is "Hello". Multiple short flashes in rapid succession from a vehicle coming the other way is warning you of a hazard you are approaching. A short flash is usually someone letting you out or saying "thank you". A long flash from a vehicle behind you, usually on a motorway, is instead of the horn (we don't really use horns on motorways here). Link to comment Share on other sites More sharing options...
Smacky. Posted May 30, 2020 Share Posted May 30, 2020 Hey there, As many people have said above me, it's usually a kind gesture to say hello to fellow drivers as they pass by, i use it to let drivers out or to say hello if my horn button is too far away aha. #happytrucking Thanks Smacky. (Zach) TruckersMP Events Team Need help? | Report a user | Appeal a ban | Request an event | Feedback | Want to join the team? Current Status - Link to comment Share on other sites More sharing options...
MadCowTransport Posted June 2, 2020 Share Posted June 2, 2020 So anyway I just realized I never properly answered the question. Reasons I personally flash my lights - If I don't feel like honking and just want to say hello as I drive by - When someone who overtakes me is clear to pull back into my lane - Lots of crazy flashing if there are trucks coming up to a wreck in the oncoming lane - To tell a player that I'm letting them pull out in front of me (out of a delivery company, or intersection, for example) I also tend to stick to some methods to signal other things for example - Beacon : When I'm carrying weight that my current truck isn't handling well, therefor I will be slow to come up to speed - Right Signal + Driving (or left signal if in England) on shoulder/apron : When I intend on giving a player extra room to overtake me (usually if I notice they are a bit swirly or dangerous driving) - CB Radio : Sometimes I use this to express any of the above, although usually I use it just if I'm bored and want to have a short chat with nearby players. (I only speak English though so I run into a lot of language barrier) You have never truly trucked unless you have trucked with a MAD COW! Link to comment Share on other sites More sharing options...
.Quality Posted June 13, 2020 Share Posted June 13, 2020 Reasons why: - flash shortly multiple times to warn of a slow vehicle or other incident ahead - greet the other driver - particularly in dlc areas of the map, seeing other drivers is fairly uncommon, so using the lights serves as a friendly and non-invasive greeting (the horn would often be a bit obnoxious and loud in these circumstances) - long flash to signal to another driver that I am giving way to them Another signal I would use is turning on the hazard warning lights before coming to a full stop, for instance before a queue of traffic or a red light. Kind regards, .Quality Link to comment Share on other sites More sharing options...
ScaniaFan89 Posted June 13, 2020 Share Posted June 13, 2020 I tend to do 3 flashes to mimic SOS & sometimes use hazards to reinforce the alert, 2 flashes is either hello or letting someone out though i tend to beep for hello & several blasts of the horn or a long blast is when someone cuts me off or forces an overtake into traffic i.e running me off the road etc! Beacons are if im pulling something heavy or dangerous or to alert others to a situation i.e a crash in traffic along with hazards Link to comment Share on other sites More sharing options...
MAX490907 Posted June 14, 2020 Share Posted June 14, 2020 As many have said, it's to greet people. Personally, I am a huge hater of this "high beams culture" on TruckersMP. The high beams are blinding and unnecessary and the honking is no better. If you really want to say hello to the passing vehicle, press x. Otherwise it's just subtracting from the fun and the experience. I see a lot of people saying they use the high beams for better visibility of the road, especially while on the backroads, and this is fine. But just like the real world you have to turn them off when there are any vehicles around you because otherwise you're blinding them. Granted the "blinding" effect is less prominent in ETS since it's a game but it's annoying none-the-less. A more serious issue with the "high beams culture" is that it makes signaling overtaking vehicles a joke. Flicking your high beams in TruckersMP should be treated just as they are in the real world, in which they are used to signal the vehicle ahead of you for a variety of reasons depending on context. Examples include letting a vehicle pass at a 4-way stop, allowing a vehicle to switch into your lane, to alert them that their lights aren't on/high beams are on, or to warn of a hazard. A horn can also be used in place of these scenarios, but keep in mind that horns sound harsh for a reason. In most situations, they are interpreted as a means of signaling a hazard to all vehicles around you. Also turn your beacons off... Link to comment Share on other sites More sharing options...
Strad Posted June 15, 2020 Share Posted June 15, 2020 Over here in Singapore people flash their lights when they're greeting fellow drivers on the road and/or when someone else cuts them off. Drivers here are ruthless let me tell ya! But based on what I've seen in TMP, drivers use their air horn as a form of communication like greetings, while the normal horn is used when someone else is driving recklessly and could potentially cause harm. Flashing lights would be an alternative to air honking. Link to comment Share on other sites More sharing options...
Guest - Pink Ribbon - Posted June 24, 2020 Share Posted June 24, 2020 If I'm moving and want to say hello to them without typing in chat I do 2 quick flashes. If someone let's me out of a junction I flash 3 times to indicate me saying thanks. If I'm at a Give way sign or somebody wants to merge or rejoin the road then I flash a few times to indicate for them to go. Link to comment Share on other sites More sharing options...
GrandLionTR Posted June 25, 2020 Share Posted June 25, 2020 Used to greet high beams. Continuous use of the high beam is a bad behavior... YouTube Channel Link to comment Share on other sites More sharing options...
8RazziA8 Posted July 10, 2020 Share Posted July 10, 2020 I flash my lights to either greet or point out dangers to other players, such as traffic jams or accidents. But sometimes I also point out their mistakes or lags to others. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.