g920 G920 gas and brake problem

[Rocka16 0]

Hi guys!

 

I got a Problem with the G920 Steering wheel since the last Logitech Gaming Software Update. I also got a Firmware Update for the G920. So I wanted to drive with the steering wheel but the Gas Pedal and the Brake Pedal were buggy. Normaly if you press the Gas pedal 25%, the Vehicle accelerates 25%. At the Controller settings (ingame) you see at the axis stettings the orange controll line. But now the problem. No matter how strong or weak I use the pedal, it is always used in the game to 100 percent. Like a key on the keyboard. Either 100% or 0%. Strangely, the clutch works perfectly. Just as the brake and the gas previously worked well. I've already reinstalled the Logitech software several times and older versions of it as well. Do you have any idea how to solve it?

[Titanic4 529]

Can you make a screenshot of "Controllers" tab of the in-game settings, showing both steering axis and the pedal ones, as well as the "Keys and buttons" menu, showing the first 4 commands from the top of the list?

[[AL-15] Üye : Kerim 21 0]

you can change the brake power and gas power in the settings

[Dancool000 172]

Hello there,

 

Did you get the answer you were looking for with the answers given above?
Your confirmation of the status of your issue/question helps us keep the forum always organized!

 

Kind Regards,
Dancool000

TruckersMP Support

[DylanRees 52]

I have the latest Logitech software for my G29 and it's working fine. Make sure you have mapped the pedals in controllers, not the keyboard settings. If you have them set to both unmap them from the keyboard settings and try remapping the pedals in controls. Is the clutch working fine or is it only the accelerator and brake pedals having the problem?

[AssassinGoEasy 205]

It would be helpful if you have made a screenshot of your problem so we can assist you more OR if you would like to head over to http://www.TruckersMP.com/support that is another relief  

[Rocka16 0]

So here are the screenshots....

And to answer DylanRees question: Yes the clutch works perfect.

 

This screenshot shows what happens if I do not use a pedal.

 

 

This screenshot shows what happens if I do not use a pedal.

 

 

This screenshot shows what happens when I press the throttle pedal. No matter how strong. In the game it is always pressed to 100%.

 

 

In the tests I used the pedals only about 25%. I cant upload the screenshot with the buttons. But the buttons are all set to the default settings.

 

Edited August 12 by NightSword^
All > 1 post // regroup

[Bears I respekt 21]

Try to make default settings in the drivers and in the game, and then continue fine-tuning and calibrating to your liking.

[Titanic4 529]

Have you checked the pedal set settings on currently used profile in LGS/Logitech G Hub? The default value for sensitivity of each pedal is 50 %. 

[Savage. 960]

Hello,

 

Did you get the answer you were looking for with the answer given above?
Your confirmation of the status of your issue/question helps us keep the forum always organised!

 

Sincerely,
Savage

TruckersMP Support

[TFM DJ ccowie 1250]

Hello,

Thank you for creating this topic. Of course, we would also like to thank the community for their contribution to this topic by answering with helpful, professional replies.

It is now time that we move this topic to the Inactive topics section as there has not been any reply for 3 days. The original poster of this topic can contact me on the forums to have this topic reopened if needed.

// Locked and moved to Inactive.

Have a great weekend everyone!

Kindest Regards,
TFM DJ ccowie
TruckersMP Support

[[TR] SkortiL 2208]

Hello There!

 

Because of this topic has been inactive for 1 more weeks , I'll have to move this topic to Unsolved Topics.
If you still need any help, feel free to create a new topic or contact us directly by submitting a support ticket: https://www.truckersmp.com/support

 

Sincerely,
[TR] SkortiL
TruckersMP Support

 

//Moved to Unsolved Topics