Jump to content
  • 1
[L.C.T]Emito[ARG]

Accelerator in depth

Question

Hello truckers! I have a problem with the steering wheel pedals Driving Force GT. The problem is the following: when I enter the game and start the truck, it stays accelerated (as if I was with the throttle locked) I have already checked if my pedals were wrong, but it is the game. (I tried the "Combined" mode but I find it very uncomfortable and inaccurate) Is there any solution other than the combined mode?

 

asdsdsddsdsdsds.png.03d8fb36b48648e06919adf2d11525ad.png310529199_Sinttulo.thumb.png.191bfbe305cc12cfd9410b73049d6a47.png

Share this post


Link to post
Share on other sites

13 answers to this question

Recommended Posts

  • 0

On the test page, press "Settings"(seen as Configuración"), then untick the first tickbox from the very top of the window, which appears afterwards. When the tickbox is ticked, the steering wheel will report both brake and accelerator as one single axis. When it's unticked, the wheel will report brake and accelerator as separate axes. Your ETS2 profile seems to be configured with separate axes in mind. Also, try pressing all the pedals in the pedal set in sequence at least few times in order to make them calibrated.

  • Like 1

Share this post


Link to post
Share on other sites
  • 0
16 hours ago, coolio859 said:

Hola @ [LCT] Emito [ARG] ,

 

¿Has intentado configurar el acelerador en el juego en la opción que no está invertida?

 

Espero que esto ayude.

 

Saludos cordiales,

Coolio859

 

I tried all the options, but none works. Still thanks for your help :D

16 hours ago, 049David [GER] said:

Hola, tuve el mismo problema con mi volante Logitech G29. 

Solo tuve que restablecer la configuración de mis controles a los valores predeterminados y esto me lo solucionó. Quizás esto también funcione para ti.

If you mean those of the game, I did it but it seems that the mistake is in the game. I reinstalled it and it's still like this (Thanks for your input)

1172957255_Sinttulo.thumb.png.9d112cd14a27a718ea41a8ebf162d04c.png

Share this post


Link to post
Share on other sites
  • 0
7 hours ago, Titanic4 said:

En la página de prueba, presione "Configuración" (visto como Configuración "), luego desactive la primera casilla de verificación desde la parte superior de la ventana, que aparece después. Cuando se marca la casilla, el volante informará tanto el freno como el acelerador como uno eje único. Cuando no está marcado, la rueda informará el freno y el acelerador como ejes separados. Su perfil ETS2 parece estar configurado con ejes separados en mente. Además, intente presionar todos los pedales en el conjunto de pedales en secuencia al menos algunas veces en orden para hacerlos calibrados.

That is the only solution so far that worked for me. Several months ago I made the same report on this and it was you who gave me the solution, but I got tired of playing this way and now I am looking for a solution other than the combined pedal (But thank you very much for responding again :) )

Share this post


Link to post
Share on other sites
  • 0
2 hours ago, Savage. said:

Hola

 

¿Recibió la respuesta que buscaba con las respuestas dadas anteriormente?
¡Su confirmación del estado de su problema / pregunta nos ayuda a mantener el foro siempre organizado!

 

Sinceramente,
salvaje

TruckersMP Support

 

No, I'm still waiting for more solutions

Share this post


Link to post
Share on other sites
  • 0

Can you double check that you have the save values as me in your controls file in documents under your profile. I am also using a Logitech wheel and pedals.

 cePAiCf.png?1

  • Like 1

Share this post


Link to post
Share on other sites
  • 0
2 hours ago, aalb75 said:

¿Puede verificar que tiene los valores guardados como yo en su archivo de controles en los documentos bajo su perfil? También estoy usando una rueda Logitech y pedales.

 cePAiCf.png? 1

 

I have verified and they are the same parameters. asdsdsddsdsdsds.png.4f63cac7e6c15b4d192f81cd2f40a42f.png

Share this post


Link to post
Share on other sites
  • 0

Ok, let's try something else.

First click at 1 and press your accelerator all the way down and release it again.

Notice what direction the yellow line at 2 moves.

If it moves from left to right you accelerator works normal in the game.

If it moves from right to left you have to select the opposite in the menu.

 KZAPXrF.jpg

Share this post


Link to post
Share on other sites
  • 0

Hello There!

 

Your topic has been inactive for 3 days since the last reply.
Because of inactivity, I will have to move this topic to Inactive Topics.
If you still have any questions about this, feel free to DM me or our support team members, we will open this again.
Thanks to all for participation!

 

//Locked and Moved to Inactive

Share this post


Link to post
Share on other sites
  • 0

Hello,
 
I am going to move this topic to the Unsolved Section because it has been inactive again for a week.
Do not hesitate to contact us again by creating another topic or a support ticket.

 

Kind Regards,

Savage

TruckersMP Support 

 

//Moved to Unsolved Topics 

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...