Jump to content
  • 0

Text Failure: 0x80092013


Vanheden

Question

9 answers to this question

Recommended Posts

  • 2

Hello @Elwood,

 

In order, to fix that problem, I recommend you to do the following:

Open CMD as administrator then run the below commands, restart your PC after running the commands. Press HERE for a video tutorial

  • ipconfig /flushdns
  • nbtstat –r
  • netsh int ip reset
  • netsh winsock reset

If the above commands don't work make sure you don't have any antivirus which might block the connection such as Kaspersky.

 

Kind Regards,

BL4CK$K1LL
TruckersMP Support

  • Thanks 1
  • Upvote 1
Link to comment
Share on other sites

  • 0

Hello before you were the same subject

 

Solution 1:


Open any VPN program and try again.(I advise UltraSurf https://ultrasurf.us/)

Turn off firewall and anti-vuris programs.

Try turning your router off for 1 minute and then turning it back on and see if you still have connection problems

Try clearing your DNS cache, follow this link for the guide https://documentation.cpanel.net/display/CKB/How+To+Clear+Your+DNS+Cache


Solution 2:


1. Run the program as an administrator (right click the shortcut and select 'run as an administrator' and accept the UAC prompt.

2. Run TruckersMP in compatibility mode for Windows 7, please follow this guide http://pearsonsupport.helpserve.com/Knowledgebase/Article/View/210/21/how-to-install-or-run-a-program-in-compatibility-mode-in-windows-7

3. Install these two programs:

.NET Framework 4.6.2

https://www.microsoft.com/en-us/download/details.aspx?id=53344

 

VisualC++ 2015

https://www.microsoft.com/en-us/download/details.aspx?id=48145

 


this answer was given by @Savage.

Поздрави : Wub:

Нощно желание

Link to comment
Share on other sites

  • 0
12 minutes ago, BL4CK$K1LL said:

Hello @Elwood,

 

In order, to fix that problem, I recommend you to do the following:

Open CMD as administrator then run the below commands, restart your PC after running the commands. Press HERE for a video tutorial

  • ipconfig /flushdns
  • nbtstat –r
  • netsh int ip reset
  • netsh winsock reset

If the above commands don't work make sure you don't have any antivirus which might block the connection such as Kaspersky.

 

Kind Regards,

BL4CK$K1LL
TruckersMP Support

Did this not work for me.

40 minutes ago, Nigtwish said:

Hello before you were the same subject

 

Solution 1:


Open any VPN program and try again.(I advise UltraSurf https://ultrasurf.us/)

Turn off firewall and anti-vuris programs.

Try turning your router off for 1 minute and then turning it back on and see if you still have connection problems

Try clearing your DNS cache, follow this link for the guide https://documentation.cpanel.net/display/CKB/How+To+Clear+Your+DNS+Cache


Solution 2:


1. Run the program as an administrator (right click the shortcut and select 'run as an administrator' and accept the UAC prompt.

2. Run TruckersMP in compatibility mode for Windows 7, please follow this guide http://pearsonsupport.helpserve.com/Knowledgebase/Article/View/210/21/how-to-install-or-run-a-program-in-compatibility-mode-in-windows-7

3. Install these two programs:

.NET Framework 4.6.2

https://www.microsoft.com/en-us/download/details.aspx?id=53344

 

VisualC++ 2015

https://www.microsoft.com/en-us/download/details.aspx?id=48145

 


this answer was given by @Savage.



I have done this before and nothing works.

  • HaulieCry 1

If it's a Scania, then no worries! 

Link to comment
Share on other sites

  • 0

Hello :) 

Try these:

Solution 1:

1) Start your computer and log on as an administrator.

2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.

3) In the new window, select "Restore my computer to an earlier time" option and then click Next.

4) Select the most recent system restore point from the "On this list, click a restore point" list, and then click Next.

5) Click Next on the confirmation window.

6) Restarts the computer when the restoration is finished.

 

Solution 2:

  • Press the Windows Key + R (Win+R) on your keyboard.
  • Enter "cmd" (without the quotes) and press Enter.
  • Type “netsh winsock reset”(without the quotes) and then hit the Enter key on your keyboard.
  • Once it’s complete, you'll see the message “Winsock reset completed successfully”.
  • Restart the computer and run the TruckersMP Launcher as administrator.
Link to comment
Share on other sites

  • 0

Hello there,

 

We are glad to hear that the problem has been solved!
Thanks for all participation!
Don't hesitate to contact us again if you need any help in the future.

 

Sincerely,
[TR] SkortiL
TruckersMP Support

 

//locked and moved to Solved Topics 

Sincerely,

SkortiL [TR] 

 

Create a Support Ticket / TruckersMP Rules / Feedback / Guides / Meet the Team

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.