CB Radio

[Wersah <3]

Hello, I have a problem with ingame CB radio. People can hear me, but I can't hear anyone, I can't even hear that sound when someone starts talking.

- In-game setting (located in TAB) are setted in default.

- I can hear anything else in ets, my engine, horn, TFM radio etc..

- I reinstalled the whole TMP mod, still not working.

I don't really know, what can be the problem.. but if I can hear everything except CB in Ets, that means, the problem should be in in-game settings, but that's not possible, cause they are setted in default.. I don't really know, please help. Thanks.

[[MCG] Kien Giang]

Hello

Start TruckersMP, then press the cog button in the player list, or press the cog icon in upper left corner on the login screen, select the "Sound" tab, then check the "Speaker device" - change it to "Default", then press "Apply". After that, press the "Start test" on the same tab. You should hear yourself as you speak during the test.

 

Also try this solution:

1. Right click the volume icon on your taskbar:  http://prntscr.com/lr5rjc

2. Click sounds and then go to the playback tab http://prntscr.com/lr5qoj

3. Right click speakers / the green ticked device and select properties: http://prntscr.com/lr5qfq

4. Go to the advanced tab. Then ensure the following settings in the image are set. Afterwards, press restore defaults. http://prntscr.com/lr5q12

5. Restart TruckersMP.

6. If this fails to work: a reinstall of your audio drivers would also eliminate another possible solution.

[[MCG] Kien Giang]

Hello

There are few things you may need to check:

 

       1. Check your default microphone - it shouldn't be set to stereo mix or similar

       2. Check if your headset has the mic mute switch somewhere. If you find it, set it into opposite state - you might've muted the mic by accident.

       3. Check the volume of the default microphone - if it's very low(close to 0%), raise it up.

       4. Check if you have plugged in the microphone into microphone connector(may not be applicable for USB headsets).

 

Also make sure that CB radio is actually turned on in-game.

If everything listed is checked and fixed(if applicable) there's settings in-game to change the volume of CB transmit and receive. 

In the settings(cog icon) select "sound" tab and you'll find voice and mic volume sliders. First one sets the CB receive volume, the second one sets the CB transmit volume.

 

Open your panel with the TAB key multiplayer > Voice > Voice volume setting pull to the right.

Open the game. Return to the desktop.at the time sound level in the audio mixer from the speaker icon, right click on TruckersMP.

 

You can read this guide:

 

And read these topics:

 

[CalvinV01]

Click [TAB] > Setting> Sound > Speaker Device, then make sure you have select the device that you are using

[Grundii]

Hey @[LKW Tr.] Wersah,

 

are you satisfied with the given answers or do you need further help to fix your problem regarding CB radio?

[mexiumut]

Hello, If you are using a sound card, please update your sound card. If you're not using a sound card, update your motherboard's Realtek HD Audio driver.

 

https://www.realtek.com/en/downloads

*Restart the computer after installation.

 

Also, please try this step if the above step does not work.

 

My Documents > ETS2MP > config.txt Replace the settings with these values. (If this step does not work, delete the config.txt file)

 

"sounds" : {
"engine" : true,
"gearbox" : true,
"horn" : true,
"lift_axle" : true,
"master_volume" : 97,
"mic_device" : "Default",
"mic_volume" : 90,
"music_volume" : 97,
"reversing" : true,
"sound_effects" : true,
"sound_effects_volume" : 97,
"speaker_device" : "Default",
"voice_volume" : 100
}

 

Kind Regards,

mexiumut

[Wersah <3]

Hello, I've tried all your advices. When I was doing it, I found a very interesting thing. When someone is talking in CB, I can't hear anyone in ETS, but I can see it in Volume Mixer (photo 1). So my Speakers in-game should be setted wrong, but they are not see photos 2 & 3. I have the same Speakers setted, but I can hear everything except CB as I said. That's really weird.

1: http://prntscr.com/mm8pcs

2: http://prntscr.com/mm8q5h

3: http://prntscr.com/mm8qn4

 

EDIT: I can also hear them when I am recording it, see: 

 

[Grundii]

Do you using any sound equalizer or anything similar? Indeed, your problem is really curious but I suspect that this problem is causing by any program you've installed.

And, can you tell me please which headphone or headset you are using? And do you have installed & using any software of your headphone or headset?

[trixicat]

It also can help, if you try to update the driver of your soundcard.

[Wersah <3]

@[ETS2MCG] Kien Giang thanks a lot, It's now working. I was using 32-bit and not 24-bit. You made my day bro, thank you!

[InvisibleRaptor]

Hello @[LKW Tr.] Wersah,

Because the best answer has been marked and we also got your confirmation I am going to move this topic to Solved Section.
If you'll require further help again, do not hesitate to create another topic or a support ticket!

Thank you all for your participation!

/Locked and Moved to Solved