Problem with the joystick

[TeodorLicht]

Hi. It's my first time trying to play TruckersMP. However, I am having trouble with my joystick. I am using a Logitech Force 3D Pro, and I am having a weird problem with apparently has to do with the axis or something.

 

So, for some reason, ETS2 has configured my joystick incorrectly, so what happens is: when I move my joystick to the left, for example, it does steer left but it also brakes the truck. Another example, if I steer to the right, it does turn the truck, but it also accelerates the truck. This is clearly something wrong in the configuration, I just don't know how to fix it. If you have any ideas tell me and I'll try it out. Any help is appreciated

[TeodorLicht]

Ok I seem to have fixed it, just had to move the deadzones up to maximum

[BlocKing]

Make sure you do the settings right watch the video you might have made a wrong setting .

 

 

 

[FernandoCR [ESP]]

Maybe it did also set the "vertical" axis to accelerate and brake? So, if you push the joystick forward, it accelerates and if you pull, it brakes? Check the other assignments in the Controls and Keys/Buttons pages of your settings, that's the only thing that comes to my mind.

[[T.G.E][01] Lorena*]

6 minutes ago, TeodorLicht said:

Hola. Es mi primera vez tratando de jugar TruckersMP. Sin embargo, estoy teniendo problemas con mi joystick. Estoy utilizando un Logitech Force 3D Pro, y estoy teniendo un problema extraño con parecer tiene que ver con el eje o algo así.

 

Así que, por alguna razón, ETS2 ha configurado mi palanca de mando de forma incorrecta, por lo que lo que ocurre es: cuando muevo la palanca de mando hacia la izquierda, por ejemplo, no direccional izquierda pero también los frenos del camión. Otro ejemplo, si dirigirá hacia la derecha, lo hace girar el camión, sino que también acelera el camión. Esto es claramente algo mal en la configuración, sólo que no sé cómo solucionarlo. Si tienes alguna idea dime y voy a probarlo. Cualquier ayuda se agradece

You configure the advanced keyboard and driver option correctly?

1- Options > Controls > Driver Wizard > Change in H > Rank > Advanced Options
2- Options > Keys.

Good luck!

[TrademarkGamer]

Had to get my joystick out for this one (excuse the innuendo). If you haven't already, go into the controls and click the input wizard. Go trough all the steps until it lets you mess with the axis. Play around with the axis and the dead zones, see if that works.

[MrHarv98]

Locked and moved to solved