Jump to content
  • 0

G27 Fanaled not working...


Guest

Question

Hello Truckers,

I just installed Fanaled for my Logitech G27 and it works in single player. However, the story changes when I load multiplayer. The warning for the plugin does not pop up and the LEDS just won't light up.

Any help would be greatly appriciated.

Regards,

ETS2 MP Trucker

Link to comment
Share on other sites

8 answers to this question

Recommended Posts

  • 0

Hi Aaron & Harv,

 

I would like to thank both of you for your time and patience in helping me to troubleshoot the issue.

 

Basically I found out that it was my mistake and the issue was Fanaled would work in 32bit but not on 64bit,

based on that ETS2 MP now runs 64bit hence the mod did not work. I did not troubleshooting and went to the

log files of ETS2 and found out that the plugin was not loading and throwing an error (<ERROR> unable to load: 0000007E).

I did some Googling and found out that I needed to install some runtimes from Microsoft and I am pleased to report that

Fanaleds works like a charm now. I am really sorry in causing so much trouble.

 

Links to the Microsoft runtimes:

32bit: https://www.microsoft.com/de-de/download/details.aspx?id=8328

64bit: https://www.microsoft.com/en-us/download/details.aspx?id=13523

 

Credits to where I found the fix from:

http://forum.scssoft.com/viewtopic.php?f=109&t=165536&start=10

 

This topic can now be move to the resolved section.

 

Many thanks,

ETS2 MP Trucker

Link to comment
Share on other sites

  • 0

ok mate in the menu on fanaleds go to help at the bottom of the list go setup games automatically then follow the prompt's choose where ets 2 or ats or ats mp is installed I just used programs x64 or x86 directly found both ats and ets 2 extra should setup it up by itself should get it working Im in the process of finding the actual RPM'S you need in ATS for the KW let me know if this help's but should get it working ingame but I post the actual RPM'S soon as I can


ok get the latest FanaLED'S software here: http://fanaleds.com/ do a fresh install once removed all of the old software from system install the LanaLED's 2.3H once it's installed then open FanaLED'S then go to Help option then go (setup up games automatically) follow the prompt's choose where your ETS 2 and ATS or ETS 2 MP or ATS MP is installed should be in (Programs x64 or x86) select Program's catergory then ok it search the whole catergory once its found ATS or ETS 2 click ok to set it up once both games are done close that now since I only use 1 truck in both games here are the value's I manage to find that works ok but you can suite them for you if you like

ETS 2

I only use the Volvo FH so put this exact (only rough might need to change them a little)

Car name = FH / RPM first = 500/ RPM second = 1500 / RPM third = 2300 / RPM last 2500 the last 4 boxes should be 0

ATS OR ATS MP

I only use the KW T680 so put this exact (only rough might need to change them a little)

Car name = T680 / RPM first = 700/ RPM second = 1200 / RPM third = 2000 / RPM last 2500 the last 4 boxes should be 0

I hope this help's

Kind Regard's Aaron

Edited by MrHarv
Merged 2 posts
Link to comment
Share on other sites

  • 0

Hi aaron,

 

I have the plugins installed on the ets2 x86 and x64 bin folders, it works fine in single player.

However after following your instructions I am still unable to get it working on ETS2 MP.

 

Many thanks,

ETS2 MP Trucker

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.