jeroenV1982 Posted November 24, 2015 Share Posted November 24, 2015 Hi Guys, In case your interested in building a "REAL" truck sim, please SKULL my project and leave some feedback! https://hackaday.io/project/8448-real-scania-dashboard-truck-simulator Link to comment Share on other sites More sharing options...
Gerolsteiner Sprudel Posted November 24, 2015 Share Posted November 24, 2015 That looks absolutely fantastic! Link to comment Share on other sites More sharing options...
Paul_Ted Posted November 24, 2015 Share Posted November 24, 2015 It would be nice, but expensive Link to comment Share on other sites More sharing options...
Clashin_Jon Posted November 24, 2015 Share Posted November 24, 2015 Needs a clean lol This scania <3 https://hackaday.io/project/8448/gallery#2d7f851213f9b2537314b46b040eec5e Pro Twitch Streamer > Link to comment Share on other sites More sharing options...
Simulator Experiencer Posted November 24, 2015 Share Posted November 24, 2015 lol i was doing the same thing but my one is a Volvo fh16 globetrotter but them i was look at the price to build a new one with new features cost me about 16 grand so instead i went to a Auction and bought one for 2 grand the only problem was like some cables are faulty but i replace it now its working fine but yea its a good choice love that scania nice one man i saw some other options like a racing type but i more into trucks not cars Link to comment Share on other sites More sharing options...
STOCKHOLM GHOST Posted November 24, 2015 Share Posted November 24, 2015 Looks cool Once i tried the same, but ofc not as complex as yours.. I bought a 2nd hand IVECO driver chair. Found a "h-shifter project" in the internet and took it to a CNC machinery center and built it up (12 front-2 rear), bought a MOMO driving wheel and adapted it to my Fanatec set. (You know, big driving wheel improves realism.) By connecting the pc to a 55" Led TV, the project ended. I played about a month with this configuration, then i need to move my house. All the stuff is now staying at cellar and i'm too lazy to set it up again Link to comment Share on other sites More sharing options...
MartyTheGamer Posted November 24, 2015 Share Posted November 24, 2015 Looks awesome, I've always dreamt about making something similar but it's just a bit impossible for me right now. Good luck! Link to comment Share on other sites More sharing options...
Simulator Experiencer Posted November 25, 2015 Share Posted November 25, 2015 Needs a clean lol This scania <3 https://hackaday.io/project/8448/gallery#2d7f851213f9b2537314b46b040eec5e that what a real trucker is hard work Link to comment Share on other sites More sharing options...
Guest Posted November 25, 2015 Share Posted November 25, 2015 I would love to do this buy a second hand truck and wire it all up to work on ets [emoji41][emoji41][emoji41][emoji41][emoji41] Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Gorkal1ty Posted November 25, 2015 Share Posted November 25, 2015 OMG! hahah looking awesome. Now you only need... a 4K 3 metres wide monitor or a 5 screen monitor setup for that??? LOL. Must keep tracking on this, good luck. Link to comment Share on other sites More sharing options...
[Ekip] Baranonen34 Posted November 25, 2015 Share Posted November 25, 2015 Absolutely great. Link to comment Share on other sites More sharing options...
jeroenV1982 Posted November 26, 2015 Author Share Posted November 26, 2015 Thanks for all the nice replies guys, this is what keeps me going SUPER! @Gorkal1ty yes, finding a screen without having to pay will be an issue I hope I can find a cheap projector or nice sponsor Link to comment Share on other sites More sharing options...
Sennis Posted November 26, 2015 Share Posted November 26, 2015 Wow, nice job, now i want to build one my self but im lazy Link to comment Share on other sites More sharing options...
jeroenV1982 Posted November 27, 2015 Author Share Posted November 27, 2015 Cant be lazy with this, its hard work! Link to comment Share on other sites More sharing options...
jacoblovekw Posted November 27, 2015 Share Posted November 27, 2015 Well...thats dope <3 Link to comment Share on other sites More sharing options...
jeroenV1982 Posted November 28, 2015 Author Share Posted November 28, 2015 People, our own design PCB to connect a Volkswagen Polo 6R Dashboard to ETS2 is ready for orders! If interested, please let me know! You need this equipment: 1x Polo 6R Cockpit (from scrapyard) €100 http://www.ebay.de/sch/i.html?_odkw=vw+polo+6r+tsi+tachometer&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xvw+polo+6r+tsi+tacho.TRS0&_nkw=vw+polo+6r+tsi+tacho&_sacat=0 1x Arduino UNO Rev 3 €6 http://www.aliexpress.com/item/Free-shipping-Low-Price-Electronics-Integrated-Circuit-for-Arduino-UNO-R3-MEGA328P-ATMEGA16U2-Development-Board-With/32315008128.html?spm=2114.01020208.3.1.8LtMFk&ws_ab_test=searchweb201556_2_79_78_77_80,searchweb201644_5,searchweb201560_7 1x SEEED Can-BUS Shield €25 http://www.seeedstudio.com/depot/CANBUS-Shield-V12-p-2256.html 1x Our PCB to connect the Polo Cockpit €60-100 ex shipping 1x IDE Flatbed cable or Dupont cable €3 http://www.aliexpress.com/item/120pcs-20cm-male-male-male-female-and-female-jumper-wire-Dupont-cable-for-Arduino/1728903423.html?spm=2114.01020208.3.1.p3EI7s&ws_ab_test=searchweb201556_2_79_78_77_80,searchweb201644_5,searchweb201560_7 3x 3.3K ohm NTC Resistor for temperature measurement €1 http://www.reichelt.de/Heissleiter-Varistoren/NTC-0-2-3-3K/3/index.html?ACTION=3&GROUPID=3114&ARTICLE=13559&OFFSET=16&%22 2 Potentiometers for the Polo Dash €2 http://www.aliexpress.com/item/15values-3296W-Potentiometers-Kit-3296W-MultiTurn-trimmer-adjustable-precision-Potentiometer-3296W-Variable-Resistors/32323358523.html 1x 12Vdc Power adapter for cockpit http://www.aliexpress.com/item/1PCS-12V2A-AC-100V-240V-Converter-Adapter-DC-12V-2A-2000mA-Power-Supply-EU-Plug-5/32281921836.html?spm=2114.01020208.3.1.5vQ3gd&ws_ab_test=searchweb201556_2_79_78_77_80,searchweb201644_5,searchweb201560_7 Total est: €200 / 250 max Link to comment Share on other sites More sharing options...
jeroenV1982 Posted November 30, 2015 Author Share Posted November 30, 2015 How to connect a REAL Scania 4-series Cruise Control to ETS2!! Link to comment Share on other sites More sharing options...
jeroenV1982 Posted December 3, 2015 Author Share Posted December 3, 2015 Want to use a REAL Truck parking brake Valve like I did? Click HERE !! Link to comment Share on other sites More sharing options...
KurdiStaN Posted December 3, 2015 Share Posted December 3, 2015 Haha, awsome project! Keep it going! Employed in: Viva Trucking (VTC) Link to comment Share on other sites More sharing options...
Zyder Posted December 3, 2015 Share Posted December 3, 2015 That looks amazing. Was going to do something like that, but didn't have the money or supplies to do it. Good luck finishing it High End Transport, Driver | WoTRDB, Support and Translator | Freelance Virtual Photographer Excellence In Motion Link to comment Share on other sites More sharing options...
xhavefunx Posted December 4, 2015 Share Posted December 4, 2015 That's extreme! Link to comment Share on other sites More sharing options...
jeroenV1982 Posted December 12, 2015 Author Share Posted December 12, 2015 Guys, a REAL Scania 4-series Retarder handle connected to ETS2 would be really cool right? Almost Finished! Link to comment Share on other sites More sharing options...
jeroenV1982 Posted December 16, 2015 Author Share Posted December 16, 2015 Retarder is finished and ready for the ETS2 community to use! How to Guide: 1# Buy a Scania Retarder Part No.1349967 Here or Here 2# Buy a cheap Arduino Leonardo 3# Upload my Code with Arduino IDE to your Leonardo 4# Connect Retarder PIN 2 to Leonardo 5V, Connect Retarder PIN 6 to Leonardo PIN GND and Finally Connect Retarder PIN 7 to Leonardo PIN A0 5# Assign a key for your in-game Retarder (0 Decrease and 9 Increase) in the ETS2 Setting menu 6# Disable "Automatic Retarder" in the game settings in ETS2 7# Have fun! Watch the result on YouTube: https://www.youtube.com/watch?v=zbWTbmyDSao&feature=youtu.be Link to comment Share on other sites More sharing options...
jeroenV1982 Posted December 18, 2015 Author Share Posted December 18, 2015 Next; Cruise Control !! Click here to follow my LOGS. Link to comment Share on other sites More sharing options...
jeroenV1982 Posted December 21, 2015 Author Share Posted December 21, 2015 See my new video! Direction Indicators are working! https://youtu.be/0S2hfWKBWhQ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.