Jump to content

Recommended Posts

Posted

(BR)Este guide foi feito para ajudar até pessoas que nunca fizeram um save edit na vida delas então grande parte dele pode ser pulado se vôce sabe o que está fazendo, se vôce só quiser o codigo para colocar no seu save pule para o CAPÍTULO 6 RESULTADO 1 E 2 obrigado.

 

(ENG) This guide was made to help people that never did any sort of save editing before, so a big part of it is not necessary if you know what you're doing, if you just want the license plate codes to use on your save file please go to CHAPTER 6 Example 2 OR 3 thx.

 

(BR) Olá, hoje estarei ensinando vocês a como fazer/editar/usar a placa de padrão antigo (padrão mercosul tera seu proprio guide alguma hora talvez... eu acho) utilizada pelos veiculos aqui no brasil no Truckersmp (funciona no caminhão e no reboque) sem a necessidade de mods ou de muito conhecimento de como o jogo funciona.

 

spacer.png

 

Aviso antes de começar: O EURO TRUCK SIMULATOR 2  POSSUI ALGUMAS LIMITAÇÕES EM RELAÇÃO A COMO AS PLACAS FUNCIONAM NO JOGO,EXEMPLOS SÃO:

 

1-Toda vez que o jogador trocar de caminhão/reboque o jogo ira resetar a placa,e o jogador tera que colocar a placa novamente no caminhão/reboque ou seja, SALVE A PLACA QUE VOCE CRIOU EM UM BLOCO DE NOTAS EM UM LOCAL SEGURO.

 

2-Por causa de como o jogo funciona dependendo do tamanho do nome da cidade que voce quiser usar na sua placa A PLACA PODE FICAR COM O NOME NÂO CENTRALIZADO OU NÃO APARCER NO JOGO.

(MAIS SOBRE ISTO NO CAPITULO 6 EXEMPLO 1)

 

 

 

Bom com isso dito podemos começar.

 

Capítulo 1:

Entendendo como funcionam as placa brasileira.

É desnecessario,eu sei.....

 

cores_placas_veiculos_br.png

Nas imagens a cima podemos ver primeiramente os tipos de placas que são usadas no brasil, no total são 6 diferentes combinações todas possuem diferentes cores e signficados que estão escritos abaixo de cada exemplotambem nestas imagens podemos perceber que todas são compostas de três letras e quatro números com um traço separando-os, exemplo:

XXX-0000

Tambem podemos perceber que encima das letras e dos numeros temos o NOME e o MUNICÍPIO da placa, exemplo:

 

 São Paulo-SP

XXX-0000

E basicamente é assim que a placa brasileira funciona, sei que muitos ja sabiam disso, mais é sempre bom relembrar.

 

 

 

 

 

Capítulo 2:

Baixando o SII DECRYPT.

Já já começa a diversão.

 

Antes de começar primeiro precisamos baixar um unico programa o SII DECRYPT programa que nos deixar editar o nosso save game e assim colocar a placa no jogo.

 

LINK PARA BAIXAR O SII DECRYPT

 

Com o Sii Decrypt baixado agora vamos configurar o ETS2 para que o programa funcione corretamente.

 

 

 

Capítulo 3:

Configurando o ETS2.

Agora sim começa a diversão.

 

 

Bom agora que nos baixamos o SII Decrypt precisamos configurar o Euro Truck para que o programa funcione corretamente.

 

 

Passo 1:

Antes de começar por favor fechar o jogo.

 

Abra o Windows Explorer e navegue até a pasta do jogo em seus documentos

 

n5Q0lKx.png

 

Passo 2:

 

Entre na pasta "Euro Truck Simulator 2"

 

R8I2YA1.png

 

Passo 3:

Clique duas vezes no config.cfg

 

oHZWudT.png

Caso apareça para selecionar como abrir,abra com o bloco de notas.

 

prWKuwT.png

 

Passo 4:

No bloco de notas aperte CTRL+F e Pesquise DEVELOPER.

PRESTE ATENÇÃO NA PARTE DE DIREÇÃO.

 

  8s5OJYJ.png

 

Passo 5:

Ache a linha  "uset g_developer" e troque o "0" para "1".

 

XMWWieY.png

 

Passo 6:

Depois de mudar o valor, novamente aperte CTRL+F e pesquise CONSOLE.

 

wCq30Y2.png

 

Passo 7:

Ache a linha "uset g_console" e novamente troque o "0" para "1".

 

Auvjggj.png

 

Passo 8:

Novamente aperte CTRL+F e desta vez selecione A DIREÇÃO ACIMA e pesquise FORMAT.

 

mXj42F2.png

 

Passo 9:

Encontre a linha "uset g_save_format" e mude o valor de "0" para "2".

 

cAoa6xC.png

 

Passo 10:

Agora é só salvar o arquivo e seguir para o proximo capitulo.

 

Capítulo 4:

Desativando o Steam Cloud.

Facin.

 

 

Certo agora que baixamos o sii decrypt e configuramos o jogo antes de começarmos a editar o save, precisamos primeiro desativar uma opção no nosso perfil.

 

Passo 1:

Abra o jogo normalmente e clique no seu perfil.

 

jnYTeN0.png

 

qf0IeAP.png

 

Passo 2:

Clique em editar perfil.

 

0eURLDG.png

 

Passo 3:

Desmaque a opção de usar o Steam Cloud.

RvToHLm.png

 

Aperte OK.

 

LUpK6nz.png

 

Passo 4:

Aplique as mudanças.

 

BFkJFUi.png

 

E volte para a tela inicial do jogo.

 

3sIV7no.png

 

 

Capítulo 5:

Selecionando o caminhão/reboque e salvando o jogo.

Facin 2 o retorno.

 

Com o Steam Cloud desativado agora e só selecionar o caminhão/reboque e salvar o jogo.

 

 

Passo 1:

Continue o jogo.

 

hjWGqZG.png

 

 

Passo 2:

Selecione e use/pegue o caminhão e Reboque desejados.

DOsawli.png

 

t6yRBEt.png

 

OBS:Como eu selecionei um reboque que possui 3 placas o processo de colocar a placa tera q ser feito 3 vezes, se o reboque só tivesse uma placa só seria necessario fazer uma vez. (mas explicações no CAPITULO 8 Passo 7)

 

Passo 3:

Salvar o jogo.

 

H6OOyKQ.png

 

dAFXn8f.png

 

E com isso termina a parte facil do processo, agora iremos começar a editar o nosso save.

 

Capítulo 6:

Entendendo a placa.

Ta ficando um pouco dificil...

 

Agora que estamos com tudo pronto para começar a editar o nosso save,acho que é uma boa ideia primeiro explicar o que realmente estamos fazendo no nosso save.

 

 

Exemplo 1:

Quebrando em partes o codigo da placa:

QcpNKJZ.png

 

P:O que é BGR?

R:BGR é o formato de cor usado pelo ETS2 e ATS para formar cores, ele é igual ao RGB só que os canais azul e vermelho são invertidos,BGR são os 3 canais de cores primarias que formam cores quando combinadas no exemplo da foto o valor 00007F é usado e ele corresponde a cor vermelha.

 

P:Como transformar uma cor em BGR?

R:Recomendo usar o site wamingo para escolher a sua cor.

 

m1ZIfoI.png

OBS:USAR O VALOR BGR# E SE A COR TIVER LETRAS COLOCAR ELAS MAIÚSCULAS NO SEU SAVE

 

P:Quantas letras a cidade que eu escolhi pode ter?

R:A cidade escolhida deve ter de 8 a 9 LETRAS SEM CONTAR AS DUAS LETRAS DO MUNICIPIO.

Exemplos:

GUARULHOS-SP

BERTIOGA-SP

 

P:O que acontece se a cidade que eu escolhi tiver menos de 8 letras ou mais de 9 letras?

R:O nome da cidade vai ficar TORTO na placa OU A PLACA NÃO VAI APARECER.

Exemplo:

e9xSUtE.png

 

 

Resultado 1:

PLACA COMERCIAL VERMELHA

 

"<color value=FF00007F><margin left=-15><img src=/material/ui/white.mat xscale=stretch yscale=stretch><ret><color value=FFFFFFFF><offset hshift=150 vshift=15>AHV-9853 <font xscale=0.41 yscale=0.41><offset hshift=-128 vshift=-11>BERTIOGA-SP|netherlands" 

 

Resultado no jogo:

 

4Ej7ddq.png

 

 

 

Resultado 2:

PLACA PRIVADA CINZA

"<color value=FF707070><margin left=-15><img src=/material/ui/white.mat xscale=stretch yscale=stretch><ret><color value=FF000000><offset hshift=150 vshift=15>UWU-1489  <font xscale=0.41 yscale=0.41><offset hshift=-128 vshift=-11>BERTIOGA-SP|netherlands"

 

Resultado no jogo:

gsBnMHw.png

 

 

Bom e com isso tudo explicado agora podemos pular para a ultima parte, fazendo e usando a sua placa no jogo.

 

Capítulo 7:

Editando e usando a placa.

Estamos quase acabando relex...

Agora que ja sabemos como o codigo funciona e o que cada valor representa podemos começar a fazer nossa placa.

 

PLACA BASE:

"<color value=FF00007F><margin left=-15><img src=/material/ui/white.mat xscale=stretch yscale=stretch><ret><color value=FFFFFFFF><offset hshift=150 vshift=15>AHV-9853 <font xscale=0.41 yscale=0.41><offset hshift=-128 vshift=-11>BERTIOGA-SP|netherlands"

 

Passo 1:

Abra o bloco de notas e cole a placa base(ai em cima) nele(vôce vai usar ela varias vezes então não perca o bloco de notas).

 

4RVmpWn.png

 

Passo 2:

Edite a placa do seu jeito e salve o arquivo.

 

qcdCfNg.png

Passo 3:

Entre na pasta "EURO TRUCK SIMULATOR 2".

 

R8I2YA1.png

 

Passo 4:

Entre na pasta "PROFILES".

1K4gDLd.png

Passo 5:

Entre na pasta do seu perfil.

 

1OHVsOG.png

 

OBS:O nome do seu perfil pode não estar igual ao meu,se vôce possui mais de uma pasta e não sabe qual é a do seu perfil clique na opção de DATA DE MODIFICAÇÃO a pasta mais recente em teoria é a pasta do seu perfil.

 

 

Passo 6:

Depois de ter encontrado o seu perfil entre na pasta na "SAVE".

 

j9RMOoL.png

 

 

Passo 7:

Entre na pasta com o numero do seu save.

 

F62kZYt.png

 

OBS:Novamente o numero do seu save pode não ser o mesmo que o meu, se vôce possui mais de uma pasta com numero e não sabe qual é a do save que vôce fez, clique na opção de DATA DE MODIFICAÇÃO (SE ELE NÃO ESTIVER JA SELECIONADA) a pasta mais recente em QUE POSSUI O NOME COM NUMEROS(QUE NÃO TENHA AUTOSAVE NO NOME) na teoria é a pasta do seu save.

 

 

Passo 8:

Copie o programa que baixamos no começo do guide para a pasta do save.

 

CSz6Cfq.png

Passo 9:

Arraste o arquivo GAME.SII para o SII_DECRYPT.

 

OLv0JtY.png

 

 

Passo 10:

Abra o arquivo "GAME.SII".

oLEVfJt.png

 

OBS:Caso essa tela apareça selecione o bloco de notas para abrir o arquivo.

 

8vfmKqG.png

 

Passo 11:

No bloco de notas aperte CTRL+F e pesquise MY_TRUCK.

Fique atento com a direção.

gfIIlMY.png

 

 

Passo 12:

Ache a linha my_truck: e copie o nameless.xxx.xxxx.xxxx para um bloco de notas.

MpljqL1.png

 

OBS:Toda vez que vôce trocar de caminhão ou criar um novo save o codigo do nameless vai mudar, então não é necessario salvar o nameless.

 

 

Passo 13:

Aperte o CTRL+F novamente e cole o nameless e pesquise duas vezes ou até vôce encontrar a linha "vehicle : _nameless.xxx.xxxx.xxxx"

Fique atento com a direção.

 36AYLZ8.png

 

Passo 14:

Após encontrar o nameless correto va descendo lentamente até vôce encontrar a linha "license_plate:"

Q32XzPX.png

 

kPh7xDc.png

 

 

Passo 15:

Selecione a sua placa atual do seu caminhao (até as aspas).

manWwyL.png

 

 

Passo 16:

Vá até o bloco de notas aonde a placa que vôce fez esta e copie tudo (novamente até as aspas).

UBcU4sJ.png


 

Passo 17:

Volte para o GAME.SII e aperte CTRL+V.

usK53UG.png

A linha da placa é para ficar assim depois do CTRL+V.

 

 

Passo 18:

Se vôce só quiser trocar a placa do caminhão agora é so salvar o bloco de notas e carregar o jogo, se tudo der certo seu caminhão estará com a placa que vôce criou, se nada acontecer por favor ir para o CAPITULO 9agora se vôce quiser trocar a placa do seu reboque vá para o proximo capitulo.

 

 

Capítulo 8:

Colocando a placa no reboque.

A beleza está nos detalhes.

 

Agora que o nosso caminhão está com a nossa placa, precisamos coloca-la tambem em nosso reboque,o processo é o mesmo basicamente,mais achei uma boa ideia explicar tbm. 

 

 

Passo 1:

Novamente abra a pesquisa apertando CTRL+F e pesquise my_trailer (preste atenção na direção,é para colocar em encima).

 

SbvrAlc.png

 

Passo 2:

Encontre a linha "my_trailer :" e novamente copie somente o nameless.xxx.xxxx.xxxx.

QmpvUhs.png

OBS:Toda vez que vôce trocar de reboque ou criar um novo save o codigo do nameless vai mudar, então não é necessario salvar o nameless.

 

 

Passo 3:

Novamente aperte CTRL+F e desta vez marque a direção para baixo, cole o seu nameless e pesquise até encontrar a linha "trailer : nameless.xxx.xxxx.xxxx".

UILajM0.png

 

kB1mM2q.png

 

fVqbu8z.png

Passo 4:

Vá descendo até encontrar a linha "license_plate:".

7Oo4u3m.png

Passo 5:

Selecione a placa atual do reboque (até os aspas).

8afLLtw.png

 

Passo 6:

Vá até o bloco de notas aonde a placa que vôce fez está e copie tudo (novamente até as aspas).

 

UBcU4sJ.png

 

Passo 7:

Volte para o "GAME.SII" e aperte CTRL+V.

hdZoSJP.png

 

A linha da placa é para ficar assim depois do CTRL+V.

 

OBS:Como havia dito um pouco mas acima dependo do reboque é necessario fazer o processo mas de uma vez, em HCTS por exemplo isto é necessario, para saber se vôce precisa colar a placa mais vezes é só ir descendo e veja se vôce encontra mais linhas com o nome "license_plate:" faça este processo em todas que vôce encontrar até vôce chegar ao primeiro "vehicle_acessory:".

 

qrCe3FR.png

 

Passo 8:

Salve o "GAME.SII" e carregue o jogo, se tudo der certo seu caminhão e reboque estaram com a placa que vôce criou, se nada acontecer por favor ir para o CAPITULO 9.

 

E com isso acabamos o nosso guide, se tudo deu certo até o momento pelo menos, se algo der errado ou vôce estiver com alguma duvida va para o CAPITULO 9.

 

 

Capítulo 9:

Perguntas e respostas/suporte tecnico.

nâo sei oq escrever aq 😞

 

Neste capitulo estarei respodendo perguntas comuns e dando suporte tecnico caso algo tenha dado errado.

 

 

P:É necessario fazer estes passos novamente se eu fechar o jogo?

R:Não é necessario faze-los novamente.

 

 

P:Eu preciso fazer estes passos novamente quando eu trocar de caminhão ou reboque?

R:Sim é necessario colocar a placa novamente depois de trocar de caminhão ou reboque.

 

 

P:Estou mudando a placa mais nada está acontecendo no jogo oque pode ser?

R:Após a att 1.50 do ETS2 um bug parece ter sido introduzido que faz com que o jogo "carregue o save sem carregar o save",caso isso aconteça por favor reiniciar o jogo e tentar carregar o save novamente.

 

 

P:Posso ser banido por usar essa modificação?

R:Bom pelo o que eu saiba NÃO,uso ela a anos e nunca tive problemas.

 

 

P:Tenho mais duvidas/minha duvida não esta aqui oque fazer?

R:Por favor usar o chat para tirar suas duvidas.

 

PS:Obrigado a todos que estão vendo este guide, desculpa se não explique alguma parte direito e se tiver sugestão por favor deixa-las no chat que eu irei add ao guide.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

(ENG) Hi, in today's guide I'll be showing you how to make/edit/use the Brazillian license plate used in every vehicle here in brazil in TruckersMP, (it works on your truck and your trailer), no mods needed at all, and its so easy to make you don't even need to know a whole lot about programming to do it yourself.

 

spacer.png

 

Things you need to know before we start:Euro truck 2 has a lot of limitations when it comes to license plates including:

1-Everytime the player changes their truck/trailer the game resets the license plate, so everytime you change your truck/trailer you need to add your custom license plate to your truck/trailer again (so make a text file with your license plate and store it somewhere safe place because you will be using it again.)

 

2-Because of the way the ETS2 works depending on the size of the name of the city you chose to use in game the game may not display the city name correctly or it may not even appear in game at all,refer to CHAPTER 6 EXEMPLE 1 for more information.

 

Okay with that out of the way lets begin our guide.

 

Chapter 1:

Understanding how Brazillan license plates work.

Cause I don't think you know how they do.....

 

cores_placas_veiculos_br.png

Above this text what you are seeing is all of the license plates being used here in brazil there a 6 in total, as you can see all of them have diferrent meanings and coulors, but usually only two are used by trucks, the gray and the red one, the gray one is mostly used by personal vehicles, and red one is used by fleet/commercial vehicles, you can also noticed that they all start with three letters a dash and four more numbers here's an exemple:

 

XXX-0000

 

You also probably noticed by now that above all the letters and numbers you can see the name of a city and a state here's another exemple:

 

São Paulo-SP

XXX-0000

 

and that's basically all you need to know about brazillian license plates,and now lets begin our guide for real.

 

 

Chapter 2:

Downloading SII DECRYPT

Before we start messing with game files we first need to download a program called SII DECRYPT ,sii decrypt as name implies decrypts our save game, cause by default its encrypted,so please download the program below:

 

SII DECRYPT DOWNLOAD

 

Okay now that you downloaded SII DECRYPT you can go to the next CHAPTER.

 

 

Chapter 3:

Preparing ETS2.

The fun is just about to begin.

 

So before we start using SII DECRYPT we need to change some stuff in ETS2 for the program to work correctly.

 

 

Step 1:

Before we begin make sure the game is closed.

Open Windows Explorer and go to your documents folder.

 

n5Q0lKx.png

 

 

Step 2:

In documents go to "Euro Truck Simulator 2".

 

R8I2YA1.png

 

 

Step 3:

Find and open "config.cfg".

oHZWudT.png

 

NOTE:If Prompted how you want to open the file please select notepad.

 

prWKuwT.png

 

Step 4:

In notepad press CTRL+F and search for "Developer".

Dont forget to select the right direction.

 

8s5OJYJ.png

 

Step 5:

Find "uset g_developer" and change the "0" to a "1".

 

XMWWieY.png

 

 

Step 6:

Once again press CTRL+F and this time search for "console".

Dont forget to select the right direction.

 

wCq30Y2.png

 

 

Step 7:

Find "uset g_console" and once again change the "0" to a "1".

No its not "uset g_console_state"

 

Auvjggj.png

 

 

Step 8:

Press CTRL+F again and search for "Format" this time use up as the direction this time.

Dont forget to select the right direction.

 

mXj42F2.png

 

 

Step 9:

Find "uset g_save_format" and change the "0" to a "2".

 

cAoa6xC.png

 

Step 10:

Close and save the file and go to the next CHAPTER.

 

Chapter 4:

Disabling Steam Cloud.

Easy as pie.

 

Ok now that we downloaded Sii Decrypt and prepared the game to start save editing, we now need to disable an option in our profile before we can start save editing here's how to do it:

 

Step 1:

Open the game and click on your profile.

jnYTeN0.png

 

qf0IeAP.png

 

 

Step 2:

Click on "Edit Profile".

 

0eURLDG.png

 

Step 3:

Disable Use Steam Cloud.

RvToHLm.png

 

Click OK.

 

LUpK6nz.png

 

Step 4:

Apply the changes.

 

BFkJFUi.png

 

and go back to the title screen.

 

3sIV7no.png

 

 

Chapter 5:

Selecting a truck/trailer and saving the game.

 

 

Now that we disabled Steam Cloud here comes the last easy part selecting the truck and the trailer you want to use.

 

 

Step 1:

Continue the game.

 

hjWGqZG.png

 

 

Step 2:

Select and use/drive your desired truck and trailer.

DOsawli.png

 

t6yRBEt.png

 

NOTE:Because I decided to select a HCT trailer that has more than one license plate (it has three in total) I need to change the license plate more than once (refer to CHAPTER 8 STEP 7) for more information

 

Step 3:

Save the game.

 

H6OOyKQ.png

 

dAFXn8f.png

 

And that's it, easy right?, well... now comes the hard part, but don't worry I will try to make it as easy as possible to understand, please go to the next CHAPTER.

 

Chapter 6:

Understanding what we are actually doing.

don't worry its very simple I think...

 

Now that everything is ready to start save editing,before we start editing, I think it's a good oportunity to actually understand what we are doing and how the code works, here are some examples:

 

 

Example 1:

Breaking down the code:

 

CpzeHUq.png

 

P:What is BGR?

R:BGR is the colour format used both by ATS and ETS2 to make colours, BGR is Basically RGB but the red and blue channels are inverted, in the example above a value of 00007F was used and it corresponds to the colour red.

 

P:How do I get my colour's BGR value?

R:I recommend using this website to get that value.

 

m1ZIfoI.png

NOTE:USE THE BGR# VALUE ON YOUR SAVE FILE AND IF THE COLOUR YOU ARE USING HAS LETTERS PUT THEM IN UPPERCASE.

 

P:How long can the name of the city I want to use can be?

R:The name should have between 8 to 9 LETTERS NOT COUNTING THE TWO LETTERS USED IN THE STATE.

Examples:

GUARULHOS-SP

BERTIOGA-SP

 

P:What happens if I use a name that has less than 8 letters on more than 9?

R:The name will either appear in game not centered or it will not appear in game at all.

Example:

e9xSUtE.png

 

 

 Example 2:

RED COMMERCIAL LICENSE PLATE

 

"<color value=FF00007F><margin left=-15><img src=/material/ui/white.mat xscale=stretch yscale=stretch><ret><color value=FFFFFFFF><offset hshift=150 vshift=15>AHV-9853 <font xscale=0.41 yscale=0.41><offset hshift=-128 vshift=-11>BERTIOGA-SP|netherlands" 

 

How it looks In game:

 

4Ej7ddq.png

 

 

 

Example 3:

GRAY PRIVATE LICENSE PLATE

"<color value=FF707070><margin left=-15><img src=/material/ui/white.mat xscale=stretch yscale=stretch><ret><color value=FF000000><offset hshift=150 vshift=15>UWU-1489  <font xscale=0.41 yscale=0.41><offset hshift=-128 vshift=-11>BERTIOGA-SP|netherlands"

 

how It look In game:

gsBnMHw.png

 

 

And with all that explained now we can go to the next CHAPTER, editing and using your custom license plate.

 

Chapter 7:

Editing and using your license plate.

we almost done relax...

 

Now that we know how the license plate actually works we can now edit it and actually use it in game.

 

BASE:

"<color value=FF00007F><margin left=-15><img src=/material/ui/white.mat xscale=stretch yscale=stretch><ret><color value=FFFFFFFF><offset hshift=150 vshift=15>AHV-9853 <font xscale=0.41 yscale=0.41><offset hshift=-128 vshift=-11>BERTIOGA-SP|netherlands"

 

Step 1:

Open a new notepad and copy the base(just above this text) and paste it in the notepad and create your desired license plate(you are going to be using this notepad a lot, so keep it somewhere safe).

 

4RVmpWn.png

 

Step 2:

Save the notepad.

 

qcdCfNg.png

Step 3:

Go to decuments and go to "EURO TRUCK SIMULATOR 2".

 

R8I2YA1.png

 

Step 4:

go to "PROFILES".

1K4gDLd.png

 

Step 5:

Go to your profile's folder.

 

1OHVsOG.png

 

NOTE:Your profile name is not gonna be the same as mine, if you only have a folder that should be it,if you have more than one and you dont know which one is the correct one click on the DATE MODIFIED thing up there  and in theory the latest folder should be the correct one.

 

 

Step 6:

Now that you hopefully found the right folder go to "SAVE".

 

j9RMOoL.png

 

 

Step 7:

Go to in to your save game's folder (it should have a number for a name).

 

F62kZYt.png

 

NOTE:Once again your save game's folder number is not going to be the same as mine, so if you have more than one folder, click on Date modified (If its not already selected) and once again the latest folder should be the right one (IF THE NAME OF THE FOLDER HAS LETTERS OR it STARTS WITH AUTOSAVE THATS NOT THE CORRECT FOLDER).

 

 

Step 8:

Copy SII Decrypt to your save folder.

 

CSz6Cfq.png

Step 9:

Drag GAME.SII to SII_DECRYPT.

 

OLv0JtY.png

 

 

Step 10:

Open "GAME.SII".

oLEVfJt.png

 

NOTE: If Prompted how you want to open the file please select notepad.

 

8vfmKqG.png

 

Step 11:

In notepad press CTRL+F and search for MY_TRUCK.

Dont forget about the direction it should be down for now.

gfIIlMY.png

 

 

Step 12:

Find my_truck: and copy the nameless.xxx.xxxx.xxxx to your clipboard or a notepad.

MpljqL1.png

 

NOTE:Everytime you make a new save game or change your truck this value is going to change,So you dont need to save it)

 

 

Step 13:

Press CTRL+F again and paste the nameless and search twice or until you find "vehicle : _nameless.xxx.xxxx.xxxx".

Once again see if you select the right direction.

 36AYLZ8.png

 

Step 14:

Now that you found the correct nameless scroll down a bit until you find "license_plate:".

Q32XzPX.png

 

kPh7xDc.png

 

 

Step 15:

Select your current license plate (including the ").

manWwyL.png

 

 

Step 16:

Go back to the notepad where your license plate is and select everything (including the ").

UBcU4sJ.png


 

Step 17:

Go back to GAME.SII and press CTRL+V.

usK53UG.png

Your notepad should look like this after the CTRL+V.

 

Step 18:

If you only wanted to change your truck's license plate now you go ahead and save and close the notepad, and open the game and load your save game If everything you done so far is correct the game should load and your truck is going to be using the license plate you just made, however if nothing happend or your license plate disappeared Please GO TO to CHAPTER 9If you also wanna use the license plate on your trailer go to the next chapter.

 

 

Chapter 8:

Using the license plate on your trailer.

just one more step.

 

Now that your truck is using the license plate you just made you can also add it to your trailer,here's how you do it:

 

 

Step 1:

Once again press CTRL+F and search for my_trailer (note that this time the direction should be up).

 

SbvrAlc.png

 

Step 2:

Find "my_trailer :" And copy the nameless.xxx.xxxx.xxxx.

QmpvUhs.png

NOTE:Everytime you make a new save game or change your trailer this value is going to change, So you dont need to save it)

 

 

Step 3:

Press CTRL+F and this time search using the nameless until you find "trailer : nameless.xxx.xxxx.xxxx".

UILajM0.png

 

kB1mM2q.png

(note that this time the direction should be down).

 

fVqbu8z.png

 

Step 4:

Scroll down until you find "license_plate:".

7Oo4u3m.png

Step 5:

Select your current license plate (including the ").

8afLLtw.png

 

Step 6:

Go back to the notepad where your license plate is and select everything (including the ").

 

UBcU4sJ.png

 

Step 7:

Go back to GAME.SII and press CTRL+V.

hdZoSJP.png

 

Your notepad should look like this after the CTRL+V

 

 

 

NOTE:Like i said earlier I decided to use a HCT trailer that has more than one license plate because of that I will need to paste my license plate two more time, if your not sure how many times you still need to paste the license plate again, just paste it in the  "license_plate:" line until you get to the first "vehicle_acessory:".

 

qrCe3FR.png

 

Step 8:

And we are done now!!, go ahead and save  "GAME.SII" and load or save file, if everything you done so far is correct the game should load and your truck and your trailer should be using the license plate you made, if nothing happend or your license plate disappeared Please GO TO to CHAPTER 9.

 

 

Chapter 9:

Q&A/Troubleshooting

😞

 

On this chapter I will be answering some question that you may have and troubleshooting any issues that may have poped up.

 

 

Q:Do I need to do all the steps again everytime I close my game?

A:No you just need to do it once.

 

 

Q:Do I need to do all the steps again if i decide to change my truck/trailer?

A:Yes everytime you change your trailer/truck you will need to do all the steps again.

 

 

Q:I already changed my license plate but nothing is happening what should I do?

A:So ever since 1.50 was released a bug was introduced that makes the game not load any save games at all for some reason, if that happens just restart the game and try loading the save again.

 

 

Q:Can I get banned for using this license plate?

A:NO your not going to get banned for using this "mod",ive been using it for a couple years now with no issues.

 

 

Q:I have more questions/my question is not here what should do?

A:Please use the chat below to ask any questions that you may have or idk say something.

 

PS:Thank you for using this guide, sorry if my english was a bit lacking in some places, and feel free to send any suggestions to the guide in the comments, have a nice day.

  • Like 1
  • HaulieLove 2
  • Awesome! 3
Posted
9 hours ago, Sunstrider said:

What if i want to use a screenshot as my license plate, can i still do this? (Too bad it's clientside and not synced to the server).

Hi, well as far as I know you can't (not easily at least), however if you want to use a texture that's already in game you totally can. Yes this both works clientside and serverside, I've been stopped a couple of times by people wanting to know how they can make a license plate that looked like mine.

  • 3 weeks later...
  • 1 month later...
Posted

Hey @ALLB GbmbRnmf is there any way to make it work with new Mercosur pattern? 
The typography is the same as used on stock ingame Germany's plates, so I think it would make it easier. 

 

image.png.1580e7fdf34632fe27db5146471d069e.png

 

This would help more guys from Mercosur countries to have their custom plates too, since we all use the same typography and layout, only changing the countries names, flags and initials.

 

image.png.00ee8aa2a94b14e61b643a5ff23001e4.png

 

Btw, congratulations with the tutorial!
Amazing job over there.

  • Like 1
Posted

(Eng) Hewwooo @Luc.. Thanks for the compliments regarding my guide. To answer your question of: Is there a way to make it work with the Mercosul license plates?

The answer is: Yes and no. Let me explain. Basically yes there is a way to make the mercosul license plate in ETS2, and I've been trying to make one that works for a while now however, there are some limitations and a issue that I need to fix/adress regarding this type of license plate, things like:

  • The little flags besides the name of the countries are basically nearly impossible or impossible to add to the game, so you will only be able to type in the name of the country.
  • As of now I have been unable to find a license plate to use as a base in ETS2 that will make the license plate look as faithfull to the real deal as possible.

Before I can release a new guide on how to make this plate I first need to adress these two issues, it shouldn't take long tho, and once I fix those issues I will release a tutorial/guide on how to make a mercosul license plate. Thanks once again for taking a look at my guide and for asking this question. I hope you have a wonderful day and rest of your week and take care.

(BR) Oiiiiii @Luc.. Obrigado pelos elogios em relação ao meu tutorial. Bom para responder sua pergunta sobre: É possivel fazer a placa do Mercosul

A resposta é: Sim e não. Deixa eu explicar. Basicamente sim é possivel fazer essa placa do mercosul funcionar no ETS2, E eu estou no processo de fazer uma que funcione faz um tempinho já, porem o que acontece é o seguinte, existem limitações e um pequeno problema que eu preciso arrumar com relação a essa placa, coisas como:

  • Sabe as bandeiras que ficam do lado do nome do pais? Elas são basicamente quase impossiveis ou impossivel de colocar no jogo, então infelizmente só sera possivel colocar o nome do pais.
  • Até o presente momento ainda não consegui achar uma placa que posso usar de base que já exista no jogo que faça com que a placa fica o mais parecido possivel com a de verdade.

Antes que eu possa lançar um tutorial de como fazer uma placa dessas primeiro eu preciso arrumar esses dois problemas que eu estou tendo, não é pra ser complicado/demorar muito, e quando eu conseguir arrumar esses probleminhas na hora já lanço o tutorial falando como fazer essa placa. Novamente obrigado por dar uma olhada no meu tutorial e por fazer está pergunta, espero que você tenha um bom dia e um otimo resto de semana se cuida e tmj.


 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.