LordBenji

Did you check your Steam settings? I think you might have to mess with some of the settings in the window on the right in the screenshot below. Here is a thread of someone with a similar problem (wheel working in single player but not multiplayer):

Hello @JvR_05, you don't have to worry, you are free to use any truck paint job in the game on any trucks, and use any colors on them.

@flifou0 Il se peut que vous avez une autre copie du jeu avec lequel le lanceur (launcher) utilise. Je vous suggère de regarder ce lien: Personnellement, je n'aime pas trop l'étape de RegEdit, car j'aime mieux m'abstenir de toucher le registre dans la mesure du possible. Donc si vous voulez, vous pouvez réinstaller le lanceur de TruckersMP et utiliser le chemin d'accès obtenu en ouvrant les fichiers locaux.

I've joined in 2015, and I always loved driving with my friends ever since. I've met a lot of awesome people throughout those years. I'd go for a drive, even if I was feeling down. I'm not even sure where I'd be if it wasn't for TruckersMP.

Salut @Nathannn, c'est une remorque de type "conteneur" (en anglais "container"). Donc il s'agit d'une cargaison qui est ajouté à une remorque compatible pour les conteneurs. Selon la capture d'écran, il semble que ce soit cette remorque (Contenu téléchargeable de Krone) À mon avis, tu peux utiliser celle-ci, si tu n'as pas les remorques Krone À partir de là, tu peux soit ajouter le conteneur de "SCS On The Road" de la même façon qu'on ajoute un nouvel accessoire, ou bien choisir une livraison dans le jeux, et remplacer le chemin de la cargaison avec celle du conteneur. Si tu as par example: "/def/vehicle/trailer_cargo/scs_container/container_40.sii" Tu peux le remplacer avec: "/def/vehicle/trailer/etrc_trailer_1/boxliner/container_scs.sii"

If I read that correctly, then you might have loaded the wrong file. That's why I use regular save and load, so it's less confusing to me. @|BoB| You'll need to swap the data path of the cabin you have with the one you would like to have. data_path: "/def/vehicle/truck/TRUCK.NAME/cabin/highline.sii" Don't forget that some cabins also go with other cabin accessories. That's for you to figure it out because not all trucks are the same. They can have cabin grill, cabin intake, various mirrors, etc. But don't forget to use the interior of the truck cabin you want to use (for example: Man Euro 6 interior with Man Euro 6 cabin.)

Please run TruckersMP Launcher with Administrator mode. Here is picture, check the box below and press OK. Then if you have Webclient error, install and open Ultrasurf, open launcher and install TruckersMP updates, close Ultrasurf then launch ETS2 MP.

Essayez de désinstaller TruckersMP. Ensuite tapez %ProgramData% dans la barre recherche de Windows, puis supprimez le dossier TruckersMP s'il est présent. Après, allez sur Programmes (Program files), et supprimez TruckersMP Launcher. Redémarrez votre PC, puis réinstallez le Launcher de TruckersMP. Une fois installé, faite sûr de faire clic droit sur le raccourci, propriété, compatibilité, et de cocher la case pour lancer le programme en tant qu'administrateur, et d'appliquer. Si le problème persiste, veuillez créer un billet ici: https://truckersmp.com/support/ticket/create (category: technical issue, language: french/français)

@Luny You will need to buy a double trailer and get cargo jobs with it, that's the simplest way to do it via save editing, like I showed you. Freight market or quick jobs will require a custom mod for it, which can only be enabled in single player...

I was using Gravatar, but I changed my forum and website profile pictures

@super37s The block start with block name (trailer, truck, vehicle_accessory, etc.), then has an address, and will have "{ content }". You can look at image to have example: The trailer has multiple accessories (chassis, wheels, cargo). If trailer has 5 accessories, you need to copy the 5 accessory blocks too (hint: address is pointing to the block.) If there is many accessories, I can put a visual marker to help me see where is first and last accessory block, like a vertical space (enter.) Then after you have your copy of the blocks, you need to change address. If it is "_nameless.17b.ef36.6c70", you can change "6c70" to "6c71", (possibility up to '9', and even 'a' to 'f', nameless address is hexadecimal.) You will need to do it for all the addresses for one trailer with the accessories linked to that one trailer too. Make sure address of accessory list is linked with each block. @Luny if you have owned double trailer (or triple), you can check my other comment here:

You should disable any programs that may take the focus away from your game. There is a tool (might be outdated though) that you can give it a try which is windows focus logger. Perhaps it might be caused by your anti virus? You should check the options on it and adjust it if necessary. Another option if you're willing to is to run the game in windowed mode and check if it happens too. Also never forget to update your graphics card drivers.

@Luny Are you talking about freight market? That might require a mod because it's not like you have the trailer before taking the job where you'd modify the trailer definition.

@super37s is there any specific modification you want to do on the double? Is it the paint job you want to change, or the rear trailer chassis? I can give you a few tricks. Use the trailer you want to perform the modifications, and save the game. That way you can look for "my_trailer", and it will give you the address of the current trailer. I often recommend using a dummy trailer. What do I mean by that? It's a trailer that you select from a job, with the chassis, parts, or paint job of your liking. You can use that trailer which has the parts you want, and save it, so you can take the trailer and/or part you want to use in another text document, for reference. If you want the paint, you just need the data path (and all the colors), as you will simply replace the content of the paint job object bound to the trailer of choice. As for an actual trailer you want to use, you will need to copy the object block of the trailer, and the parts that is bound to that trailer. Don't forget the addresses, each trailers and parts are unique "objects", hence why the addresses must be different. Let's say I want to replace the rear trailer of a B-Double with a tipper. I would first find a job with any tipper and select it. After I save the game, and find my trailer. I copy the block, and all the accessory blocks and save it in my new document. I change all the address and put 1 instead of 0 at the end of each one. Then I would abandon the tipper job, and buy a b-double, and modify it the way I like it (the simpler, the easier). I would use the b-double and save the game. I could decide to put the custom wheels on the tipper but it would be very easy to keep the tipper wheels already with the tipper. So I would look for my current double, and look for the slave_trailer. Then I would proceed to delete all the accessories of the trailer (and maybe leave clues where the beginning and ending of rear trailer accessories are, so I can select everything in between). Then I would delete the trailer block too. Now I would copy the tipper trailer and place it in the location of the deleted rear trailer. Then I'd copy the address of trailer block, and put it where the slave_trailer of the double is. I would save the document, then reload my save game, and it should work if there was no mistakes done (like wrong address, block is there but is not declared, address is declared but block is not present, etc.)

I would recommend to apply the same resolution of your monitor. If you look into your Display Settings, you can see the recommended option. That is what Windows recommend to use, which is usually the resolution of the monitor or what the Graphic Processing Unit can handle)

A VTC or Virtual Trucking Company is, as the name says, virtual. I see see it as role playing like a company of truckers. You can decide what you want in it, if you want certain roles, if you expect members to do specific things like log book, etc. It doesn't matter if it's just for ATS, ETS 2 or both games. You can follow some of the steps provided in the tutorial, but you don't have to do everything. Those are just guidelines on how to get started.

This is a modification of the save game (save editing). You can replace any flatbed cargo with heavy train cargo.

@tifo007 Sometimes the unreliable connection is caused by the computer that cannot handle the load of data from the server. Make sure you disable season effects, flags, and cabin accessories from the TMP options Reduce or disable development logging (also TMP options) If you have done save editing before, to reduce auto save lag, put the option back to: uset g_save_format "0" Dismiss all the employees in single player (or keep a few) Optionally, buying some of the trailer DLC might help a bit too Can you also provide the game log?

If you want cargo outside the specified countries for doubles, you'll need to modify the trailer definition of your owned trailer via save editing. You can change the chain type, country validity and source name. Here is an example of taking cargo with a triple in single player:

At the moment, only the staff are allowed to use those vans during special TMP events. As mentioned above, someone has made a suggestion to allow the use of vans. So perhaps we will see them more often in the future.

Bonjour @Thomas03501, Il semblerait que votre problème est déjà résolu. Avez vous toujours besoin d'aide?

Hello @Briian19, If you have enabled the mini console, you can either go in game and open console (the key between ESC and TAB), then type "g_minicon 0" (without the quotes) and press enter. If you are not in game, you can change that value in the file "config.cfg" in your Euro Truck Simulator folder. If you do not wish to have console at all, then go in that same file, locate "g_console" and write 0 instead of 1, then save the file. Please don't forget that the game must not be running when applying those changes in the config file.

Hello @kaptanien, it might be possible that you're running a different Steam account and it does matter when you try to play on TruckersMP. If you're not sure which Steam account is linked to your TMP account, you can use this handy API which accepts both TMP ID and Steam ID 64: https://api.truckersmp.com/v2/player/ <insert ID here> Then you can paste the steam ID at the end of this link after putting it in your browser: https://steamcommunity.com/profiles/ <insert SteamID64 here>