alexlewis2

Hello @xXLeon1401Xx, As Speedy said above you can apply to become part of the team at https://truckersmp.com/recruitment. Make sure you follow the rules and have a good punishment history, as well as being active in-game and on the forums to have a better chance at being picked! You must fit the criteria and requirements, as Speedy said in order to even be considered. It is a fairly major responsibility to be a moderator, especially a game moderator and you will have to be devoted and input a fair bit of time into your role. Also it is recommended that you do not ask to become a moderator. This can reduce the likelihood of being picked! If you behave well and are helpful in the community, you will be noticed and have a better chance of being picked! Apologies for the long-winded answer, but I hope this answers your question fully. Yours, [Plasma] Sergey.

Hello @M4RKZx, I’m sorry to hear my solutions didn’t work. I don’t know whether you did this, but try doing a full reinstallation of TruckersMP. Follow this guide to show you how to do so. Also try refreshing and restarting your PC after having uninstalled it before reinstalling it again. Try this and if it doesn’t work tell me. Yours, [Plasma] Sergey.

Hello @M4RKZx, Apologies for the late reply. Having looked at your multimon_config file, the 'monitors' line is set to 1; in other words, it's set to be played on only 1 monitor, instead of 2. This could be your issue, but I don't see how it would work in single-player and not in multi-player. However, please check the following: - Go to Documents \ Euro Truck Simulator 2. - Open the "config.cfg" file with notepad/notepad ++/any text editor. - Check that "uset r_multimon_mode" is set to 4. This is the multimon_config I use; try and see if this works - I recommend saving your current one elsewhere in case you want to revert back. https://pastebin.com/cBuPkiZ9 . Also have a look at this steam page, which is where I got my config from and there are options for a few good camera views, and for left/right hand drive (I recommend option C - hybrid - 40° screen angle). If and when you copy and paste the lines of text into your "multimon_config" file, load up in single-player first, drive around for a minute or so, and then quit and load up multiplayer. If none of the configs work, come back here and I'll try to help you further. Hope this helps! Kind regards, [Plasma] Sergey.

Hello @M4RKZx, Dual-monitor works for me on MP. Can you tell me what software you’re using for surround - Nvidia Surround or AMD Eyefinity etc.. Also make sure the resolution in game is 3840 x 1080 (Or similar if you’re using bevel correction). Can you also link your multimon_config file in a pastebin link please do I can see what might be causing the issue. Kind regards, [Plasma] Sergey.

Hello @jduruena6212803, Does the game freeze in single player? Please let me know so I can understand your issue better. Nevertheless, please try the following 3 solutions: 1. Open Steam 2. Go to Library and click Home 3. Click Euro Truck Simulator 2 4. Click Play 5. Select the option Launch with OpenGL (64-bit) and click Play 6. If the game doesn’t freeze/crash, drive a short distance in single-player and then exit the game 7. Restart your PC 8. Open and launch the TruckersMP launcher If that doesn’t work try this a full reinstallation: 1. Press the Windows Key + R (Win+R) on your keyboard 2. Enter %programdata% and press Enter 3. Find the folder TruckersMP and delete that folder 4. Navigate to C:\Program Files\ and delete the folder named TruckersMP Launcher 5. Re-install Launcher with admin privileges: https://truckersmp.com/download/ . Finally if that also doesn’t work try verifying your game files: 1. Open Steam 2. Go to Library and click Home 3. Right click Euro Truck Simulator 2 4. Go to Properties 5. Go to Local files 6. Click ‘Verify Integrity of Game Files’ and wait for the process to finish. 7. Make sure you also have the latest version of .NET Framework, DirectX and Microsoft Visual C++. Please also try running the TruckersMP launcher as administrator. I hope one of these solutions will work if you. Please let me know if they do. Kind regards, [Plasma] Sergey.

Hello @[ST I 005] Ml KU, If you are trying to take a picture in-game of the TAB menu in multiplayer, the ETS 2 internal camera will not capture this. Instead I recommend you use a different (external) program to do this. I recommend: - Xbox Game Bar - Nvidia Overlay - OBS Software You could use many others, but these are just my suggestions. I use Nvidia overlay and it works great for recording and screenshotting for reports and just for general use. I hope I have answered your question. Do not hesitate to reply and ask me a further question if you need to. Kind regards, [Plasma] Sergey.

Hello @Aborjin, Apart from beacons and horns you can place truck parts anywhere on your truck (as long as you have no more than ten duplicates of the same part). With the example of the Michelin accessories, if it is for the outside of the truck, then you can place it anywhere on the outside of the truck and likewise for the inside. What you cannot do is: > Use exterior truck parts for the inside of the truck and vice-versa (§3.2). > Make sure no parts are floating or clipping other parts (§3.3). > You cannot have more than the duplicate parts on your truck or trailer (§3.5). > You can only place beacons and horns in their default positions (§3.6). For the full list of save-editing rules go here: https://truckersmp.com/rules#3-save-editing-rules. *REMEMBER! If you aren’t sure if something is allowed, first consult the rules, and if you still aren’t sure ask an admin or create a support ticket! DON’T RISK GETTING BANNED!* I hope I have helped you. Kind regards, [Plasma] Sergey.

Hello @SoloXAdv, In response to your first question, no you can not change the sounds or any part of the Skoda vehicle as it is a multiplayer-only vehicle and so is not in the in-game files. However, it is possible to save edit parts and sounds of trucks; there are many tutorials on the TruckersMP forum page:https://forum.truckersmp.com/index.php?/forum/423-save-editing/. However, may I recommend this post to you if you wish to begin save editing: If you do want to save edit make sure it is in harmony with §3 - Save editing rules: https://truckersmp.com/rules. With regard to your second question, I am not completely sure what you mean, but I recommend save editing as it is the easiest way of editing files. I’m not sure if there is a method with GUI, but if you really want that you can submit a support ticket - https://truckersmp.com/support and they might be able to help. I hope I have been of some help to you. Kind regards, [Plasma] Sergey.

Hello again @Renault Trucks, These links will give you the official scs mod files: Base mod: https://sharemods.com/zdmxhwpikdrh/frosty_7_3.scs.html Heavy winter Add-on: https://sharemods.com/lkrniy3494jf/frosty_heavy_winter_7_3.scs.html Snow Physics: https://sharemods.com/n1uo9p1j5hj0/frosty_physics_7_3.scs.html Please download these files. Each one of these will give you 1 scs file, put the ones you want in Documents/ETS2MP/mod. If your files are not appearing after download, please ensure your firewall is not blocking and deleting them. I attach a video below: (START AT 0:14 - In the video, I am using profiles instead of the snow mod files, but it works the same) Please tell me if this helps. If this still doesn’t help please tell me exactly what you are getting when you download the snow mod files (scs files or winrar, for example). Kind regards, [Plasma] Sergey.

Hello @Renault Trucks, Download the snow mod from here: https://truckersmp.com/knowledge-base/article/84. If you scroll down this page, you will also find instructions for how to install the mod correctly. However, I shall give you a brief step-by-step guide: > Download the files. > Place them in Documents/ETS2MP/mod. (If there is no mod folder, then just create one). > Load up TruckersMP. **Make sure you do not place the files in the normal ETS 2 documents folder** I hope this helps, Kind regards, [Plasma] Sergey.

Hello @Md Rafiqul Islam, Please try the following: Step 1: > Open command prompt (cmd). > Run the command “sfc /scannow” (without the quotes) and hit Enter. > Wait for it to verify everything, once complete close and restart your PC. —————————————————————— Step 2: > Now open your steam app. > Go to your library. > Go to ETS 2/ATS. > Click “Play”. > Click “Launch with OpenGL (64-bit)”. > Continue in-game and drive a short distance. > Save and Quit. > Then start TruckersMP as administrator. If that doesn’t work try doing Step 2 again but open with DirectX (64-bit) instead. Also, could you tell me what version of DirectX you’re running and also link your crash log here? I hope this helps! Kind regards, [Plasma] Sergey.

Bonjour @arkadix, Avez-vous essayé de lancer TruckersMP en tant qu'administrateur? Faites-moi savoir si cela aide, et excuses pour la réponse tardive. Cordialement, [Plasma] Sergey.

Привет @Andryuxa_zp_ua, Обновление сайта TruckersMP вашими привилегиями покровителя может занять некоторое время. Однако также убедитесь, что на веб-сайте patreon в разделе интеграции приложений TruckersMP связан с ним. Для этого войдите в систему patreon, нажмите кнопку настроек, затем перейдите в раздел “Настройки моего профиля” и в разделе “Приложения”. Вы должны увидеть, связан ли TruckersMP или нет. Если нет, пожалуйста, дайте мне знать. Надеюсь, это поможет! С Уважением, [Plasma] Сергей.